Inventory
The following is a description of the main compo- nents shipped with your machine. Lay the compo- nents out to inventory them.
Note: If you can't find an item on this list, check the mounting location on the machine or examine the packaging materials carefully. Occasionally we
Crate Contents (Figure 4): | Qty | |
A. | Bandsaw (not shown) | 1 |
B. | Cast Iron Fence Assembly | 1 |
C. | Resaw Fence | 1 |
D. | Guide Post Handwheel | 1 |
E. | Miter Gauge | 1 |
Hardware and Tools: | Qty | |
• | Eye Bolts | 2 |
• | Fence Handle | 1 |
• | Hex Nut | 1 |
• | Resaw Fence Lock Handle |
|
| 1 |
•Flat Washer
• Moving Plate (Resaw Fence) | 1 | |
• Open End Wrench 10 x 13mm | 1 | |
• Open End Wrench 17 x 19mm | 1 | |
• | Hex Wrench 5mm & 6mm | 1 Ea |
• | Cap Screw | 1 |
G0636X 17" Ultimate Bandsaw
B
C
E
D
Figure 4. G0636 crate contents.
If any nonproprietary parts are missing (e.g. a nut or a washer), we will gladly replace them; or for the sake of expediency, replacements can be obtained at your local hardware store.
SUFFOCATION HAZARD!
Immediately discard all plas- tic bags and packing materi- als to eliminate choking/suf- focation hazards for children and animals.