To lubricate the table tilt rack and pinion assembly:
1.DISCONNECT BANDSAW FROM POWER!
2.With the table perpendicular to the blade, wipe off all existing grease and sawdust buildup from the rack.
3.Move the table up to its maximum 45˚ angle and wipe (Figure 59) off all existing grease and sawdust buildup from the rack.
Figure 59. Table tilt rack and pinion assembly.
4.Apply a thin coat of light all-purpose grease to the rack.
5.Move the table up and down several times to distribute the grease, then wipe off any excess grease.
G0636X 17" Ultimate Bandsaw
To lubricate the trunnions:
1.DISCONNECT BANDSAW FROM POWER!
2.Move the table up until it reaches its maximum 45˚ angle and wipe off all excess grease and sawdust from the trunnions.
3.Apply a thin coat of light all purpose grease to the trunnions (Figure 60).