Miter Cutting
The miter fence allows miter cuts from 0˚ through 135˚. The table mounted miter scale has a resolu- tion of 1˚.
To perform a miter cut:
1.Slide the crosscut table to the front edge of the sliding table and lock it in place.
2.Place the crosscut fence center stud in the center stud hole of the crosscut table. The fence can be installed as shown in Figure 73 for 90˚ to 135˚ cuts, or as shown in Figure 74 for 0˚ to 90˚ cuts.
Figure 73. Fence set-up for 90˚ to 135˚ cuts.
3.Rotate the fence to the desired angle and use the lock knob to lock the fence in place.
4.Position the flip stop according to the length of the workpiece you want to cut off to the left of the blade.
5.Load the workpiece onto the table saw. The set up should look similar to Figure 74.
Figure 74. Example of miter cutting operation.
6.Once all the necessary safety precautions have been taken, perform the cutting opera- tion.
G0451 14" Sliding Table Saw |