Emerson CMF200A installation manual Return Policy, New and unused equipment, Used equipment

Page 25

Return Policy

Return Policy

Micro Motion procedures must be followed when returning equipment. These procedures ensure legal compliance with government transportation agencies and help provide a safe working environment for Micro Motion employees. Failure to follow Micro Motion procedures will result in your equipment being refused delivery.

Information on return procedures and forms is available on our web support system at www.micromotion.com, or by phoning the Micro Motion Customer Service department (see page 1).

New and unused equipment

Only equipment that has not been removed from the original shipping package will be considered new and unused. New and unused equipment requires a completed Return Materials Authorization form.

Used equipment

All equipment that is not classified as new and unused is considered used. This equipment must be completely decontaminated and cleaned before being returned.

Used equipment must be accompanied by a completed Return Materials Authorization form and a Decontamination Statement for all process fluids that have been in contact with the equipment. If a Decontamination Statement cannot be completed (e.g., for food-grade process fluids), you must include a statement certifying decontamination and documenting all foreign substances that have come in contact with the equipment.

Installation Manual

23

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Micro Motion Elite Sensors Page Troubleshooting Customer serviceBefore You Begin European installations Specifications DefinitionsInstallation options CMF025, CMF050, or CMF100 Elite sensor with core processor Elite sensor with junction box Determining a Location Hazardous area installationsFull flow tubes Environmental limits113 Sensor models Electronics UL and CSA ambient temperature limitsMaximum cable lengths Maximum wiring distancesPipe run ValvesRecommended sensor orientations Orienting the SensorFlow direction arrow Vertical pipelineMounting an Elite sensor Mounting the SensorFeedthrough, plastic cap, and clamping ring Installing extended mount electronicsMounting the temperature extender onto the sensor Installing wafer-style sensors Wafer-style assembly Core processor to a 4-wire remote transmitter WiringWrapping the shield drain wires Applying the heat shrink Connecting the wires at the core processor Pressure Ratings GroundingElite pressure ratings Purge Fittings Case purging procedureRemoving a purge plug Time required to purge Elite sensor cases Rupture DisksNew and unused equipment Return PolicyUsed equipment 20002158
Top Page Image Contents