Agilent Technologies E9300 manual Typical

E9300/1B and H Power Sensor Specifications

	X2	Normal
	Mode	Mode
	Maximum Sensor Power		E9300/1B	E9300/1H
High Power	40 ms	70 ms	+40 dBm	+20 dBm
Path
	120 ms	210 ms
			+32 dBm	+12 dBm
	210 ms	400 ms
			+26 dBm	+6 dBm
Typical	400 ms	1 s
			+20 dBm	0 dBm
Settling	40 ms	70 ms
Times			+10 dBm	-10 dBm
	70 ms	120 ms
			0 dBm	-20 dBm
	400 ms	1 s
			-10 dBm	-30 dBm
Low Power
	3.4 s	6.5 s
Path			-20 dBm	-40 dBm
	6.8 s	13 s

Minimum Sensor Power

Sensor

Dynamic

Range

Figure 20 E9300/1B & H Autofilter, default resolution, 10 dB decreasing power step (not across the switching point)

Calibration Factor and Reflection Coefficient

Calibration Factor (CF) and Reflection Coefficient (Rho) data are provided on a data sheet included with the power sensor. This data is unique to each sensor. If you have more than one sensor, match the serial number on the data sheet with the serial number on the power sensor you are using. The CF corrects for the frequency response of the sensor. The Agilent EPM series power meters automatically read the CF data stored in the sensor and use it to make the corrections.

Reflection Coefficient (Rho, or ρ ) relates to the SWR according to the following formula:

1 + ρ SWR = ------------

1 – ρ

54