Woodstock W1752 owner manual Sanding/Finishing, Entanglement Hazard

Page 26

W1752 Owner's Manual (Mfg. 1/07+)

Sanding/Finishing

After turning, the workpiece can be sanded, as shown in Figure 25, and finished (in the same manner) before removing it from the lathe.

Sandpaper

Workpiece

ENTANGLEMENT HAZARD!

Wrapping the sandpaper com- pletely around the workpiece can pull your hands into the moving workpiece and may cause injury. Never wrap sandpaper complete- ly around the workpiece!

Figure 25. Typical sanding operation.

Whenever sanding or finishing, move the tool rest holder out of the way to increase personal safety and gain ade- quate working room.

OPERATIONS

-24-

Image 26

Contents OWNERS MANUAL Page Contents Introduction Woodstock Technical SupportElectrical Overall DimensionsMotor Main Specifications Other SpecificationsControls and Features Safety Standard Safety InstructionsAlways Lock Mobile Bases if Used Before Operating Machinery Additional Safety for Wood Lathes Safety 110V Operation Electrical SpecificationsElectrical Extension CordsInventory SET UPUnpacking Box Inventory FigureMachine Placement Cleaning Machine Assembly To install the tool rest, do these stepsTest Run To test run the mini wood lathe, do these stepsOperations GeneralTo change speeds, do these steps Adjusting TailstockChanging Speeds To position the tailstock along the bed, do these stepsTo adjust the tool rest vertically, do these steps Adjusting Tool RestInstalling/Removing Spur Center To install the spur center, do these stepsTo remove the live center, do these steps Installing/Removing Live CenterTo install the live center, do these steps To mount a workpiece to your faceplate, refer to Installing/Removing FaceplateTo install the faceplate, do these steps Selecting Turning Tools GougeTo set up a spindle turning operation, do these steps Spindle TurningSpindle Turning Tips To mount your workpiece to a backing block, do these steps Faceplate TurningTo mount your workpiece to the faceplate, do these steps Sanding/Finishing Entanglement HazardAccessories Lathe AccessoriesLubrication MaintenanceCleaning Unpainted Cast IronService TroubleshootingConstant Wiring Diagram W1752 Paddle SwitchParts Parts List REF PART # DescriptionLabel Placement PART # DescriptionPage Page Page Woodstock international inc. p.o. box Bellingham, Wa Warranty High Quality Machines and Tools