Woodstock W1752 owner manual Standard Safety Instructions

Page 8

SAFETY

W1752 Owner's Manual (Mfg. 1/07+)

SAFETY

READ MANUAL BEFORE OPERATING MACHINE. FAILURE TO FOLLOW INSTRUCTIONS BELOW WILL RESULT IN PERSONAL INJURY.

Indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, COULD result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, MAY result in minor or moderate injury.

This symbol is used to alert the user to useful information about proper NOTICE operation of the equipment, and/or a situation that may cause damage

to the machinery.

Standard Safety Instructions

1.READ THROUGH THE ENTIRE MANUAL BEFORE STARTING MACHINERY. Machinery presents serious injury hazards to untrained users.

2.ALWAYS USE ANSI APPROVED SAFETY GLASSES WHEN OPERATING MACHINERY. Everyday eye- glasses only have impact resistant lenses—they are NOT safety glasses.

3.ALWAYS WEAR AN NIOSH APPROVED RESPIRATOR WHEN OPERATING MACHINERY THAT PRODUCES DUST. Wood dust is a carcinogen and can cause cancer and severe respiratory illnesses.

4.ALWAYS USE HEARING PROTECTION WHEN OPERATING MACHINERY. Machinery noise can cause permanent hearing damage.

5.WEAR PROPER APPAREL. DO NOT wear loose clothing, gloves, neckties, rings, or jewelry which may get caught in moving parts. Wear protective hair covering to contain long hair and wear non-slip footwear.

6.NEVER OPERATE MACHINERY WHEN TIRED, OR UNDER THE INFLUENCE OF DRUGS OR ALCOHOL.

Be mentally alert at all times when running machinery.

7.Only allow trained and properly supervised personnel to operate machinery. Make sure operation instructions are safe and clearly understood.

8.KEEP CHILDREN AND VISITORS AWAY. Keep all children and visitors a safe distance from the work area.

9.MAKE WORKSHOP CHILD PROOF. Use padlocks, master switches, and remove start switch keys.

-6-

Page 7 Page 9
Image 8
Page 7 Page 9
Contents OWNERS MANUAL Page Contents Introduction Woodstock Technical SupportElectrical Overall DimensionsMotor Main Specifications Other SpecificationsControls and Features Safety Standard Safety InstructionsAlways Lock Mobile Bases if Used Before Operating Machinery Additional Safety for Wood Lathes Safety Electrical Specifications Electrical110V Operation Extension CordsSET UP UnpackingInventory Box Inventory FigureMachine Placement Cleaning Machine Assembly To install the tool rest, do these stepsTest Run To test run the mini wood lathe, do these stepsOperations GeneralAdjusting Tailstock Changing SpeedsTo change speeds, do these steps To position the tailstock along the bed, do these stepsAdjusting Tool Rest Installing/Removing Spur CenterTo adjust the tool rest vertically, do these steps To install the spur center, do these stepsTo remove the live center, do these steps Installing/Removing Live CenterTo install the live center, do these steps To mount a workpiece to your faceplate, refer to Installing/Removing FaceplateTo install the faceplate, do these steps Selecting Turning Tools GougeTo set up a spindle turning operation, do these steps Spindle TurningSpindle Turning Tips To mount your workpiece to a backing block, do these steps Faceplate TurningTo mount your workpiece to the faceplate, do these steps Sanding/Finishing Entanglement HazardAccessories Lathe AccessoriesMaintenance CleaningLubrication Unpainted Cast IronService TroubleshootingConstant Wiring Diagram W1752 Paddle SwitchParts Parts List REF PART
# DescriptionLabel Placement PART
# DescriptionPage Page Page Woodstock international inc. p.o. box Bellingham, Wa Warranty High Quality Machines and Tools
Top Page Image Contents