Woodstock W1752 owner manual Main Specifications, Other Specifications

Page 6

INTRODUCTION

	W1752 Owner's Manual (Mfg. 1/07+)



Main Specifications
Swing Over Bed	10"
Swing Over Tool Rest	71/2"
Distance Between Centers	15"
Spindle Size	751/64" x 17/8"
Spindle TPI	1" x 8 TPI
Outboard Spindle Size	1"
Spindle Bore	23/64"
Spindle Taper	MT#2
Tailstock Taper	MT#2
Tailstock Center	5"
Number of Spindle Speeds	6
Range of Spindle Speeds	480, 1270, 1960, 2730, 3327, 4023 RPM
Bed Width	83/16" RPM
Faceplate Size	3"
Bed Construction	Cast Iron
Frame Construction	Cast Iron and Steel
Headstock Construction	Cast Iron and Steel
Tailstock Construction	Cast Iron and Steel
Other Specifications
Country Of Origin	China
Warranty	2 Years
Serial Number Location	Data Label on Headstock
Assembly Time	10 Minutes
Sound Rating	Less than 80 dB

-4-

Image 6

Contents OWNERS MANUAL Page Contents Introduction Woodstock Technical SupportOverall Dimensions MotorElectrical Main Specifications Other SpecificationsControls and Features Safety Standard Safety InstructionsAlways Lock Mobile Bases if Used Before Operating Machinery Additional Safety for Wood Lathes Safety 110V Operation Electrical SpecificationsElectrical Extension CordsInventory SET UPUnpacking Box Inventory FigureMachine Placement Cleaning Machine Assembly To install the tool rest, do these stepsTest Run To test run the mini wood lathe, do these stepsOperations GeneralTo change speeds, do these steps Adjusting TailstockChanging Speeds To position the tailstock along the bed, do these stepsTo adjust the tool rest vertically, do these steps Adjusting Tool RestInstalling/Removing Spur Center To install the spur center, do these stepsInstalling/Removing Live Center To install the live center, do these stepsTo remove the live center, do these steps Installing/Removing Faceplate To install the faceplate, do these stepsTo mount a workpiece to your faceplate, refer to Selecting Turning Tools GougeTo set up a spindle turning operation, do these steps Spindle TurningSpindle Turning Tips Faceplate Turning To mount your workpiece to the faceplate, do these stepsTo mount your workpiece to a backing block, do these steps Sanding/Finishing Entanglement HazardAccessories Lathe AccessoriesLubrication MaintenanceCleaning Unpainted Cast IronService TroubleshootingConstant Wiring Diagram W1752 Paddle SwitchParts Parts List REF PART # DescriptionLabel Placement PART # DescriptionPage Page Page Woodstock international inc. p.o. box Bellingham, Wa Warranty High Quality Machines and Tools