Black & Decker CS1012 instruction manual General Safety Rules

Page 2

90511917 CS1012 5/7/07 9:32 AM Page 2

GENERAL SAFETY RULES

WARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury.

SAVE THESE INSTRUCTIONS

Work Area

Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.

Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.

Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control.

Electrical Safety

Double insulated tools are equipped with a polarized plug (one blade is wider than the other.) This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a polarized

outlet. Do not change the plug in any way. Double insulation eliminates the need for the three wire grounded power cord and grounded power supply system.

Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is grounded.

Don’t expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

Do not abuse the cord. Never use the cord to carry the tools or pull the plug from an outlet. Keep cord away from heat, oil, sharp edges or moving parts. Replace damaged cords immediately. Damaged cords increase the risk of electric shock.

When operating a power tool

outside, use an outdoor extension cord marked “W-A” or “W.” These cords are rated for outdoor use and reduce the risk of electric shock.

 

 

Minimum Gage for Cord Sets

 

Volts

 

Total Length of Cord in Feet

120V

 

0-25

26-50

51-100

101-150

 

 

(0-7,6m) (7,6-15,2m)

(15,2-30,4m) (30,4-45,7m)

240V

 

0-50

51-100

101-200

201-300

 

 

(0-15,2m) (15,2-30,4m)

(30,4-60,9m)

(60,9-91,4m)

Ampere Rating

 

 

 

More Not more

 

American Wire Gage

Than

Than

 

 

 

 

0

-6

18

16

16

14

6

-10

18

16

14

12

10

-12

16

16

14

12

12

-16

14

12

Not Recommended

 

 

 

 

 

 

Personal Safety

Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury,

Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. Air vents cover moving parts and should be avoided.

Avoid accidental starting. Be sure switch is off before plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch on invites accidents.

Remove adjusting keys or wrenches before turning the tool on. A wrench or a key that is left attached to a rotating part of the tool may result in personal injury.

Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the tool in unexpected situations.

Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes, hard hat, or hearing protection must be used for appropriate conditions.

Tool Use and Care

Use clamps or other practical way to secure and support the workpiece

2

Image 2
Contents 4 185mm Circular Saw VEA EL Español EN LA ContraportadaGeneral Safety Rules Specific Safety Rules Safety Guidelines Definitions Causes and Operator Prevention of KickbackSE These Instructions Additional Safety Rules Circular Saws Lead from lead-based paintsMotor Guard Against KickbackTo Reduce the Risk of Kickback Adjusting the Bevel Angle FIG Assembly / Adjustment SET-UPAdjusting the Depth of CUT Attaching the BladeAdjusting the Kerf Plate SwitchKerf Plate Adjustment FIG OperationHints for Optimum USE MaintenanceSawing Pocket CuttingFull TWO-YEAR Home USE Warranty AccessoriesService Information Mode D’EMPLOI Sécurité EN Électricité Règles Générales DE SécuritéZone DE Travail Lorsque votre corps est mis à la terreUtilisation ET Entretien DE L’OUTIL Règles DE Sécurité SpécifiquesDes évents, car ils couvrent des pièces mobiles RéparationPerformances et la sécurité de fonctionnement.V Le plomb contenu dans les peintures à base de plomb Conservez CES DirectivesRégles DE Sécurité Supplémentaires Scies Circulaires PROTÉGEZ-VOUS DES Effets DE Rebond Pour Réduire LE Risque D’EFFET DE RebondMoteur Configuration DE ’ASSEMBLAGE ET DES RéglagesAperçu Général FIG Fonctionnement Sciage AccessoiresRéglage DE LA Plaque DE Retrait Conseils Pour UNE Utilisation OptimaleInformation SUR LES Réparations » ou composer le numéro suivantAutorisé Produit et le faire réparerDans un centre de Le disjoncteur est déclenché555326-7100 Área DE Trabajo Normas Generales DE SeguridadInstrucciones Seguridad EléctricaUSO Y Cuidado DE LA Herramienta Normas DE Seguridad EspecíficasPosición de encendido, puede propiciar accidentes MantenimientoCausas DEL Retroceso Y SU Prevención POR Parte DEL Operador Provocarán pérdida del controlConserve Estas Instrucciones Provocar daños en la propiedadPara Reducir EL Riesgo DE Retroceso Peligro Riesgo DE LaceraciónManténgase Alerta Y EN Corte mientras la hoja se mueva Descripción General FIGENSAMBLADO/AJUSTE Ajuste DE LA Profundidad DE Corte YFuncionamiento Corte Interno AserradoConsejos Para UN USO Óptimo Almacenamiento DE LA LlaveGarantía Completa DE DOS Años Para USO EN EL Hogar PUEBLA, PUE CULIACAN, SIN MONTERREY, N.LGUADALAJARA, JAL MEXICO, D.F

CS1012 specifications

The Black & Decker CS1012 is a powerful and reliable cordless chainsaw that caters to a variety of cutting needs. Designed for both homeowners and DIY enthusiasts, it combines efficiency, ease of use, and innovative technology to deliver outstanding performance in a lightweight package. This model is particularly popular for outdoor tasks such as pruning trees, cutting firewood, and managing landscaping projects.

One of the standout features of the CS1012 is its 12-inch premium Oregon bar and chain, which provides excellent cutting performance and smooth operation. The chainsaw is powered by a robust 20V MAX lithium-ion battery, which offers long runtime and consistent power. This battery technology not only extends the lifespan of the tool but also ensures that users can complete their tasks without frequent interruptions. The lightweight design, weighing only 6.5 pounds, makes it easy to maneuver and reduces user fatigue, allowing for extended usage without discomfort.

The CS1012 incorporates a tool-free chain tensioning system, a significant advantage for users who require quick adjustments while working. This allows for effortless tightening or loosening of the chain, ensuring optimal performance at all times. Additionally, its automatic oiling system helps maintain the chain and bar while in use, promoting longevity and reducing the need for constant maintenance.

Safety is also a priority with the Black & Decker CS1012. It features a chain brake that helps protect the user in case of kickback, along with a two-handed grip for improved stability and control. The transparent oil tank makes it easy for users to monitor oil levels, ensuring they're always prepared before starting their projects.

In summary, the Black & Decker CS1012 is a thoughtfully designed cordless chainsaw that emphasizes power, ease of use, and safety. Its combination of a 12-inch Oregon bar, strong 20V MAX lithium-ion battery, tool-free chain tensioning, and automatic oiling system, make it an ideal choice for anyone looking to tackle outdoor cutting tasks efficiently. As a user-friendly tool, it stands out in the market for its performance and innovative features. Whether you're a seasoned woodworker or a homeowner handling occasional yard work, the CS1012 is an excellent addition to your toolkit.