Black & Decker CS1012 instruction manual Assembly / Adjustment SET-UP, Adjusting the Depth of CUT

Page 7

90511917 CS1012 5/7/07 9:32 AM Page 7

household power. Do not operate AC tools on DC. A rating of 120 volts AC/DC means that your tool will operate on standard 60 Hz AC or DC power. This information is printed on the nameplate. Lower voltage will cause loss of power and can result in over-heating. All Black

&Decker tools are factory-tested; if this tool does not operate, check the power supply. This tool is AC only.

OVERVIEW (FIG. 5)

1.On/off switch

2.Main handle

3.Secondary handle

4.Shoe

5.Saw blade

6.Saw blade guard

7.Blade guard retracting lever

8.Saw blade spanner wrench

9.Bevel adjustment knob

10.Outer washer

11.Blade retaining screw

Saw blade hex wrench (not shown)

5

1

 

2

 

3

7

 

9

8

 

 

4

10

11

 

 

5

 

6

 

ASSEMBLY / ADJUSTMENT

SET-UP

WARNING: Always unplug saw from power supply before any of the following operations.

ADJUSTING THE DEPTH OF CUT (FIG. 6 & 7)

The depth of cut should be set according to the thickness of the workpiece.

•Loosen the lever (12) to unlock the saw shoe.

•Move the saw shoe (4) into the desired position. The corresponding depth of cut can be read from the scale (13).

•Tighten the lever to lock the saw shoe in place.

•Set depth adjustment of saw such that one tooth of the blade projects below the workpiece as shown in figure 7.

6

13

 

12

7

 

Tip of tooth

Surface of wood

ADJUSTING THE BEVEL ANGLE (FIG. 8)

This tool can be set to bevel angles between 0° and 45°.

•Loosen the locking knob (9) to unlock the saw shoe.

•Move the saw shoe (4) into the desired position. The corresponding bevel angle can be read from the scale (14).

•Tighten the locking knob to lock the saw shoe in place.

8

 

9

14

 

ATTACHING THE BLADE (FIG. 9 & 10)

•To prevent spindle rotation engage the protrusions of the spanner wench (8) into the holes in the outer washer (10) as shown in figure 9.

•Loosen and remove the blade

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents VEA EL Español EN LA Contraportada 4 185mm Circular SawGeneral Safety Rules Specific Safety Rules Causes and Operator Prevention of Kickback Safety Guidelines DefinitionsLead from lead-based paints SE These Instructions Additional Safety Rules Circular SawsTo Reduce the Risk of Kickback Guard Against KickbackMotor Attaching the Blade Assembly / Adjustment SET-UPAdjusting the Depth of CUT Adjusting the Bevel Angle FIGOperation SwitchKerf Plate Adjustment FIG Adjusting the Kerf PlatePocket Cutting MaintenanceSawing Hints for Optimum USEService Information AccessoriesFull TWO-YEAR Home USE Warranty Mode D’EMPLOI Lorsque votre corps est mis à la terre Règles Générales DE SécuritéZone DE Travail Sécurité EN ÉlectricitéRéparation Règles DE Sécurité SpécifiquesDes évents, car ils couvrent des pièces mobiles Utilisation ET Entretien DE L’OUTILPerformances et la sécurité de fonctionnement.V Régles DE Sécurité Supplémentaires Scies Circulaires Conservez CES DirectivesLe plomb contenu dans les peintures à base de plomb Pour Réduire LE Risque D’EFFET DE Rebond PROTÉGEZ-VOUS DES Effets DE RebondAperçu Général FIG Configuration DE ’ASSEMBLAGE ET DES RéglagesMoteur Fonctionnement Conseils Pour UNE Utilisation Optimale AccessoiresRéglage DE LA Plaque DE Retrait Sciage» ou composer le numéro suivant Information SUR LES RéparationsLe disjoncteur est déclenché Produit et le faire réparerDans un centre de Autorisé555326-7100 Seguridad Eléctrica Normas Generales DE SeguridadInstrucciones Área DE TrabajoMantenimiento Normas DE Seguridad EspecíficasPosición de encendido, puede propiciar accidentes USO Y Cuidado DE LA HerramientaProvocarán pérdida del control Causas DEL Retroceso Y SU Prevención POR Parte DEL OperadorProvocar daños en la propiedad Conserve Estas InstruccionesManténgase Alerta Y EN Peligro Riesgo DE LaceraciónPara Reducir EL Riesgo DE Retroceso Ajuste DE LA Profundidad DE Corte Y Descripción General FIGENSAMBLADO/AJUSTE Corte mientras la hoja se muevaFuncionamiento Almacenamiento DE LA Llave AserradoConsejos Para UN USO Óptimo Corte InternoGarantía Completa DE DOS Años Para USO EN EL Hogar MEXICO, D.F CULIACAN, SIN MONTERREY, N.LGUADALAJARA, JAL PUEBLA, PUE

CS1012 specifications

The Black & Decker CS1012 is a powerful and reliable cordless chainsaw that caters to a variety of cutting needs. Designed for both homeowners and DIY enthusiasts, it combines efficiency, ease of use, and innovative technology to deliver outstanding performance in a lightweight package. This model is particularly popular for outdoor tasks such as pruning trees, cutting firewood, and managing landscaping projects.

One of the standout features of the CS1012 is its 12-inch premium Oregon bar and chain, which provides excellent cutting performance and smooth operation. The chainsaw is powered by a robust 20V MAX lithium-ion battery, which offers long runtime and consistent power. This battery technology not only extends the lifespan of the tool but also ensures that users can complete their tasks without frequent interruptions. The lightweight design, weighing only 6.5 pounds, makes it easy to maneuver and reduces user fatigue, allowing for extended usage without discomfort.

The CS1012 incorporates a tool-free chain tensioning system, a significant advantage for users who require quick adjustments while working. This allows for effortless tightening or loosening of the chain, ensuring optimal performance at all times. Additionally, its automatic oiling system helps maintain the chain and bar while in use, promoting longevity and reducing the need for constant maintenance.

Safety is also a priority with the Black & Decker CS1012. It features a chain brake that helps protect the user in case of kickback, along with a two-handed grip for improved stability and control. The transparent oil tank makes it easy for users to monitor oil levels, ensuring they're always prepared before starting their projects.

In summary, the Black & Decker CS1012 is a thoughtfully designed cordless chainsaw that emphasizes power, ease of use, and safety. Its combination of a 12-inch Oregon bar, strong 20V MAX lithium-ion battery, tool-free chain tensioning, and automatic oiling system, make it an ideal choice for anyone looking to tackle outdoor cutting tasks efficiently. As a user-friendly tool, it stands out in the market for its performance and innovative features. Whether you're a seasoned woodworker or a homeowner handling occasional yard work, the CS1012 is an excellent addition to your toolkit.
Top Page Image Contents