Craftsman 315.22839 Installing, Blade Guard Bracket Lock, Hex, Blade Riving, Pawls

Page 25

INSTALLING

THE BLADE GUARD

8OCKET

See Figures

23- 25.

HEAD8CREW8

 

BLADE

_k WARNING: If the blade is not fully lowered, turn the height handwheel to lower the blade to prevent

injury

•Get the blade guard, the blade guard bracket, and the following hardware:

2 hex bolts (5/16-18 x 1/2 in.)

2 lock washers (5/16 in.)

3 socket head screws (1/4-20 x 3/8 in.)

3 flat washers (1/4 in.)

•Align the lower end of the blade guard bracket and the threaded holes of the cradle and insert the hex bolts and lock washers. Securely tighten with a 12 mm wrench.

•Remove the throat plate. See page 34.

•Put the blade guard assembly in place on the table top, aligning the screw holes in the riving knife to the holes in the bracket. Align the hole in the front of the riving knife base with the screw hole in the cradle.

Note: The screw hole is located under the slot in back of the throat plate.

•Insert two socket head screws and two flat wash- ers in the two holes at the back of the riving knife base. Securely tighten with a 5 mm hex key.

•Insert the third socket head screw and flat washer into screw hole in cradle under throat plate. Securely tighten with a 5 mm hex key.

•Raise the blade all the way up.

BLADE

GUARD

BRACKET

LOCK

WASHER

HEX

BOLT_.

Fig. 23

FLAT

WASHER

8OCKET

HEAD8CREW

FLAT

WASHER

25

O

Fig. 24

BLADE

RIVING

KNIFE

ANTI-KICKBACK

PAWLS

Fig. 25

rRRFTSMRN°TABLESAW315.228390

Page 24 Page 26
Image 25
Page 24 Page 26
Contents IIRRFrSMRN Full ONE Year Warranty on Craftsman Table SAW 30-34 Safety Alert Symbol Symbol MeaningRules for Safe Operation Do not Feed the Material TOO Extension Cords Speed and WiringElectrical Connection Grounding InstructionsRRRFTSMRH TABLESAW315.228390 It to power supply. Saw should never be Assemble all parts to your saw before connectingConnected to power supply when you are Assembling parts, making adjustments, installingBelt Guard Blade Guard Assembly Hardware Screw#10-24x 1/2in Clip End cap for rear rail Cord Screw #8-32 x 1/2 Combinationsquare Hammer 45TRIANGLE NutdriverFramingsquare CRRFTSMRNTABLESAW315.22839014 Inch Table SawPush Offoi IorDo ExtensionNotLiftSawTablesWith. RailsHeight Handwheel ScalehandleLEG Stand Beltcover Levelingfoot Motor Bevel LockhandleOverview Bevel Handwheel Height Installing Handwheels on Table SAW BaseUpperbracewasher Hexnut Carriage Bolt LEGLegstand Flatwasher Mounting the LEG Stand on the Table SAW BaseHEX Headbolt Flat Assemblingtable ExtensionsAligning Table Extensions Split Rail DesignSee Figures 12 Rearrail Connector EndcapHEX NUT HE BOLT8 NUTFront Rail SAW Tabletable ExtensionAligning the RIP Fence and Front Rail AssemblySee Figures 17 RIP Fence Hook OverBelt Beltguard SAW PulleyChecking the Throat Plate Hexkeyframingsquare ThroatplateBlade InstallingBlade Guard Bracket Lock HEXRivingknife Blade See Figures 26Rivingknife Blade Throat Plate Framing Blade JMiter Gage Groove Framing SquareSee Figures 31 AlignmentMiter Gage Groove Blade RIP Fence FramingSquare Checking Squareness of Extension Tables to SAW TableSawtable Extension Square SawtableSee Figures 35 Replacing the BladeBlade Guard To Loosen Blade NUT Blade BlaiwasherAT Front NUT I Markedtooth Blade BLADEGUARD18NOTSHOWNFORCLARITYSee Figures 38 MitergagegrooveSee Figures 41 Sawtableview Frombelow Rearsaw Table TablebracketHexkey 8TOP 8CREW Adjustable Indicator Adjusting the Miter GageMiterknob Gage ROD Miter 8TOP 8CREWPlate Removing Replacing the Throat ThroatplateKEY 8LOT SpringclipPUSHSTICK8 Avoiding KickbackTypes of Cuts PLACELEFTHANDONWHENMITERGAGE18 See Figures 47Mitergagehereplacerighthandon Mitergageknobhere Making a RIP CUTMaking a Miter CUT RIP CUTMiter CUT Blade Mitergage Straight Angled Bevel Handwheel HeightBevel Ripcut Bevelcrosscut BladeScale Blade Onworkpieceand Making a Compound Bevel Miter CUTPlacelefthandon Mitergagehere Mitergageknobhere Making a NON-THROUGH CUT Making a Large Panel CUTLargepanelcut RIP Fence NON-THROUGHCUT Pushstick Guard BladeMaking a Dado CUT Dadocut Motor / Electrical General MaintenanceFrontof SAW Problem Cause Solution Setting Bevel Stops See Heeling Sawblade AdjustmentsIndicator Adjustments See Aligning Rip FenceFence. See Aligning Rip Fence Front Rail in the Assembly£RRFTSMRN Table SAW Figure a KEY Part Parts List for Figure aNO. Number DescriptionCraftsman Table SAW- Model no KEY Part NO. Number Parts List for Figure BCraftsman Table SAW Model no KEY Part NO. Number Parts List for Figure CDescription Qljan Figured KEY Part Number Parts List for Figure DFiguree Parts List for Figure E Figuref Parts List for Figure F Figureg Parts List for Figure G Figureh Parts List for Figure H Figurei Description Quan Parts List for FigureAu Canadapourserviceen franais

315.22839 specifications

The Craftsman 315.22839 is a versatile and reliable power tool that has gained popularity among DIY enthusiasts and professionals alike. Known for its robust construction and user-friendly features, this electric tool is perfect for a variety of tasks, from sanding and drilling to cutting.

One of the main features of the Craftsman 315.22839 is its powerful motor. Equipped with a reliable engine, it delivers impressive torque and speed, making it capable of tackling demanding projects. The tool boasts adjustable speed settings which allow users to customize the tool's performance based on the task at hand. This feature not only enhances precision but also promotes efficiency as users can switch speeds for different materials and applications.

Another standout attribute of the Craftsman 315.22839 is its ergonomic design. It has a comfortable grip that minimizes hand fatigue during extended use, ensuring that users can work longer and more efficiently. Additionally, the lightweight construction of the tool allows for easy maneuverability, making it ideal for both intricate and large-scale jobs.

The Craftsman 315.22839 also integrates advanced safety features. It includes a safety lock switch that prevents accidental startups, a crucial aspect for ensuring user safety during operation. The durable housing is designed to withstand the rigors of heavy usage, ensuring longevity and reliability in various work environments.

Versatility is a hallmark of the Craftsman brand, and the 315.22839 is no exception. It is compatible with a range of attachments and accessories, allowing users to switch between different functionalities. Whether you’re drilling into wood, cutting through metal, or sanding surfaces, the adaptable nature of this tool makes it a valuable addition to any toolbox.

In terms of technology, Craftsman has incorporated innovative engineering techniques to enhance the performance and durability of the 315.22839. Features like heat-resistant materials and advanced cooling systems ensure that the tool can operate under strenuous conditions without overheating or losing efficiency.

Overall, the Craftsman 315.22839 stands out in the crowded market of power tools. Its combination of power, efficiency, and user-friendly design makes it an excellent choice for both novice and experienced users looking for reliable performance. Whether you are embarking on a home improvement project or tackling a professional job, the 315.22839 is equipped to deliver results that meet your expectations.
Top Page Image Contents