Craftsman 315.22839 owner manual Bevelcrosscut Blade, Bevel Ripcut, Scale Blade

Page 39

•Raise the rip fence handle and remove the rip fence.

•Set the blade angle by loosening the bevel lock handle and turning the bevel handwheel. Retighten the bevel lock handle.

•Set miter gage to 0° if needed. Make sure miter gage knob is securely tightened.

•Place a support the same height as the top of the saw table behind the saw for the cut work.

•Make sure the wood is clear of the blade before turning on the saw. Insert the key and lift the switch to the ON position. Let the blade build up to full speed before feeding the wood into the blade with the miter gage.

•Hold the work firmly against the miter gage and push the miter gage to feed the work into the blade.

•When the work is completed, press the switch off and remove the key.

BEVELCROSSCUT

BLADE

ANGLED_/

•Set the blade angle by loosening the bevel lock handle and turning the bevel handwheel. Retighten the bevel lock handle.

,_ WARNING: When making a bevel rip cut, the rip fence must be on the right side of the blade.

Otherwise the fence could trap the workpiece, possibly causing kickback and resulting in injury.

•Attach the rip fence on the right side of the blade at the correct distance from the blade for the cut.

•Place a support the same height as the top of the saw table behind the saw for the cut work.

,_ WARNING: Never stand directly in the line of cut. Stand to the side to reduce the chance of

injury should kickback occur.

•Make sure the wood is clear of the blade before turning on the saw. Insert the key and lift the switch to the ON position. Let the blade obtain full speed before feeding the workpiece into the blade.

•Place the work firmly against the rip fence and feed the work into the blade.

,_ WARNING: Never push a small piece of wood into the blade with your hand. Use a pushstick as

the end of the workpiece nears the blade.

•When the work is completed, press the switch off and remove the key.

BEVEL RIPCUT

BLADERIP FENCE

ANGLEDONRIGHT

BEVELLOCK

HANDLE

(NOTSHOWN)

Fig. 52

MAKING A BEVEL RIP CUT

See Figure 53.

Try out this cut on a piece of scrap wood before cutting your workpiece. Use a pushstick to move small pieces of wood into and past the blade.

SCALE

BLADE

,_ WARNING: Make sure the blade guard is lowered over blade and is working properly to

prevent possible injury.

Fig. 53

39

rRRFTSMRN ° TABLESAW315.228390

Page 38 Page 40
Image 39
Page 38 Page 40
Contents IIRRFrSMRN Full ONE Year Warranty on Craftsman Table SAW 30-34 Safety Alert Symbol Symbol MeaningRules for Safe Operation Do not Feed the Material TOO Grounding Instructions Speed and WiringExtension Cords Electrical ConnectionRRRFTSMRH TABLESAW315.228390 Assembling parts, making adjustments, installing Assemble all parts to your saw before connectingIt to power supply. Saw should never be Connected to power supply when you areBelt Guard Blade Guard Assembly Hardware Screw#10-24x 1/2in Clip End cap for rear rail Cord Screw #8-32 x 1/2 Nutdriver Combinationsquare Hammer 45TRIANGLEFramingsquare CRRFTSMRNTABLESAW315.22839014 Inch Table SawPush Offoi IorDo ExtensionNotLiftSawTablesWith. RailsBeltcover Levelingfoot Motor Bevel Lockhandle ScalehandleHeight Handwheel LEG StandOverview LEG Installing Handwheels on Table SAW BaseBevel Handwheel Height Upperbracewasher Hexnut Carriage BoltLegstand Flatwasher Mounting the LEG Stand on the Table SAW BaseSplit Rail Design Assemblingtable ExtensionsHEX Headbolt Flat Aligning Table ExtensionsRearrail Connector Endcap See Figures 12HEX NUT SAW Tabletable Extension NUTHE BOLT8 Front RailRIP Fence Hook Over AssemblyAligning the RIP Fence and Front Rail See Figures 17Hexkeyframingsquare Throatplate SAW PulleyBelt Beltguard Checking the Throat PlateHEX InstallingBlade Blade Guard Bracket LockBlade J See Figures 26Rivingknife Blade Rivingknife Blade Throat Plate FramingMiter Gage Groove Framing SquareRIP Fence Framing AlignmentSee Figures 31 Miter Gage Groove BladeExtension Square Sawtable Checking Squareness of Extension Tables to SAW TableSquare SawtableBlade Blaiwasher Replacing the BladeSee Figures 35 Blade Guard To Loosen Blade NUTMitergagegroove BLADEGUARD18NOTSHOWNFORCLARITYAT Front NUT I Markedtooth Blade See Figures 38Sawtableview Frombelow Rearsaw Table Tablebracket See Figures 41Hexkey 8TOP 8CREW Indicator Adjusting the Miter Gage8TOP 8CREW Adjustable Miterknob Gage ROD MiterSpringclip Removing Replacing the Throat ThroatplatePlate KEY 8LOTPUSHSTICK8 Avoiding KickbackTypes of Cuts Making a RIP CUT See Figures 47PLACELEFTHANDONWHENMITERGAGE18 Mitergagehereplacerighthandon MitergageknobhereBlade Mitergage Straight Angled Bevel Handwheel Height RIP CUTMaking a Miter CUT Miter CUTBevelcrosscut Blade Bevel RipcutScale Blade Making a Compound Bevel Miter CUT OnworkpieceandPlacelefthandon Mitergagehere Mitergageknobhere NON-THROUGHCUT Pushstick Guard Blade Making a Large Panel CUTMaking a NON-THROUGH CUT Largepanelcut RIP FenceMaking a Dado CUT Dadocut General Maintenance Motor / ElectricalFrontof SAW Problem Cause Solution See Aligning Rip Fence See Heeling Sawblade AdjustmentsSetting Bevel Stops Indicator AdjustmentsFence. See Aligning Rip Fence Front Rail in the Assembly£RRFTSMRN Table SAW Figure a Description Parts List for Figure aKEY Part NO. NumberCraftsman Table SAW- Model no KEY Part NO. Number Parts List for Figure BCraftsman Table SAW Model no Parts List for Figure C KEY Part NO. NumberDescription Qljan Figured KEY Part Number Parts List for Figure DFiguree Parts List for Figure E Figuref Parts List for Figure F Figureg Parts List for Figure G Figureh Parts List for Figure H Figurei Description Quan Parts List for FigureAu Canadapourserviceen franais

315.22839 specifications

The Craftsman 315.22839 is a versatile and reliable power tool that has gained popularity among DIY enthusiasts and professionals alike. Known for its robust construction and user-friendly features, this electric tool is perfect for a variety of tasks, from sanding and drilling to cutting.

One of the main features of the Craftsman 315.22839 is its powerful motor. Equipped with a reliable engine, it delivers impressive torque and speed, making it capable of tackling demanding projects. The tool boasts adjustable speed settings which allow users to customize the tool's performance based on the task at hand. This feature not only enhances precision but also promotes efficiency as users can switch speeds for different materials and applications.

Another standout attribute of the Craftsman 315.22839 is its ergonomic design. It has a comfortable grip that minimizes hand fatigue during extended use, ensuring that users can work longer and more efficiently. Additionally, the lightweight construction of the tool allows for easy maneuverability, making it ideal for both intricate and large-scale jobs.

The Craftsman 315.22839 also integrates advanced safety features. It includes a safety lock switch that prevents accidental startups, a crucial aspect for ensuring user safety during operation. The durable housing is designed to withstand the rigors of heavy usage, ensuring longevity and reliability in various work environments.

Versatility is a hallmark of the Craftsman brand, and the 315.22839 is no exception. It is compatible with a range of attachments and accessories, allowing users to switch between different functionalities. Whether you’re drilling into wood, cutting through metal, or sanding surfaces, the adaptable nature of this tool makes it a valuable addition to any toolbox.

In terms of technology, Craftsman has incorporated innovative engineering techniques to enhance the performance and durability of the 315.22839. Features like heat-resistant materials and advanced cooling systems ensure that the tool can operate under strenuous conditions without overheating or losing efficiency.

Overall, the Craftsman 315.22839 stands out in the crowded market of power tools. Its combination of power, efficiency, and user-friendly design makes it an excellent choice for both novice and experienced users looking for reliable performance. Whether you are embarking on a home improvement project or tackling a professional job, the 315.22839 is equipped to deliver results that meet your expectations.
Top Page Image Contents