Panasonic SC-BT200, SC-BT303, SC-BT203 Playing video recorded on a Video Camera or Video Recorder

STATUS Status messages

The status messages give you information about what is currently being played. Each time you press [STATUS], the information displayed will change.

e.g., [BD-V]	Type of disc	Play status
	BD-Video	

Play

No display	T: Title	Items change
	C: Chapter	depending on the
	PL: Playlist	disc played.

Elapsed time in the title

T1 C1 0:05.14

0:20.52

Current position Total time

Depending on the kind of disc or the playback status, this display may not appear.

Screen Aspect

When black bars are shown at the top, bottom, left, and right sides of the screen, you can enlarge the image to fill the screen.

1Press [SUB MENU].

2Press [3, 4] to select “Screen Aspect” and press [OK].

3 Press [2, 1] to select “Side cut” or “Zoom” and press [OK]. Normal: Normal output

Side cut: The black bars on the right and left sides of the 16:9 image disappear and the image is enlarged. Please note

that the right and left sides of the image are cut off when the black bar is not displayed.

Zoom: The black bars on the top and bottom sides of the 4:3 image disappear and the image is enlarged. Please note that the top and bottom sides of the image are cut off when the black bar is not displayed.

≥[BD-V][DVD-V]: “Side cut” does not have any effect.

≥When “TV Aspect” (> 39) is set to “4:3” or “4:3 Letterbox”, the “Zoom” effect is disabled.

Playing video recorded on a Video Camera or Video Recorder

[AVCHD] [MPEG2]

It is possible to playback the High Definition (AVCHD format) video recorded on a Panasonic High definition Video Camera on a DVD-RAM/R/RW/R DL/+R/+RW/+R DL, or SD card and Standard Definition (MPEG2 format) Video recorded on the Panasonic SD Video Camera on a SD card.

1Insert a disc or SD card. (> 19)

≥The “Video (AVCHD)” or “Video (MPEG-2)” screen is displayed.

≥If media containing data in different file formats is inserted, the file selection menu may be displayed.

Press [3, 4] to select “Play Video (AVCHD)” or “Play Video (MPEG-2)” and press [OK].

e.g., [SD]	SD Card
Play Pictures (JPEG)
Play Video (AVCHD)
Play Video (MPEG-2)
Select an action or press [RETURN].
SUB	OK
MENU	RETURN

2Press [3, 4, 2, 1] to select the title and press [OK].

≥It may pause for a few seconds between images when

editing such as partial deletion is performed.

≥High definition video (transfer rate of 18 Mbps or faster)

NOTE cannot be played back correctly if it was recorded on a DVD compatible to double speed or slower.

	To return to the previous screen
	Press [RETURN].
TIPS	To exit the screen
	Press [TOP MENU/DIRECT NAVIGATOR].

To switch from other menus to AVCHD or MPEG2 menu

(If the media contains data in different file formats)

1)Press [START].

2)Press [3, 4] to select “Menu” and press [OK].

3)Press [3, 4] to select “Play Video (AVCHD)” or “Play Video (MPEG-2)” and press [OK].

Playback

DISPLAY

-SLEEP

Setting the sleep timer

1Press and hold [–SLEEP] for 3 seconds.

2 While “SLEEP ££” is displayed,

Press [–SLEEP] several times to select the time (in minutes).

SLEEP 30 ) SLEEP 60 ) SLEEP 90 )SLEEP 120 )OFF ^""""""""""""""""""""""""""""""""b

e.g.

SLP

To confirm the remaining time

Press and hold [–SLEEP] for 3 seconds.

≥The sleep timer cannot be set while the Setup menu is displayed. ≥The sleep timer will be canceled in the following cases.

–When the sleep timer is set to “OFF”.

–When this unit is turned off from the remote control, main unit or via the VIERA Link.

RQT9508

21