Panasonic SC-BT203, SC-BT200, SC-BT303 warranty Other difficulties with playback

Page 50

Troubleshooting guide

Network

 

Page

 

 

 

I can’t connect to the network.

≥Have you subscribed to high speed internet connection? Check that the LAN cable is

14

 

properly connected.

14

 

≥Have you plugged a telephone cord into the LAN terminal on this unit? Connect with a

 

straight LAN cable.

—

 

≥Confirm the power for the modem or broadband router is turned on.

 

≥Confirm the network settings. Follow any instructions you may have received from your ISP

—

 

(Internet Service Provider) and make changes to the settings.

—

 

≥Are the broadband router settings correct? Read the operating instructions for the broadband

 

router.

—

 

≥Is the broadband router and/or modem connected correctly ? Check the operating

 

instructions for each device and connect accordingly.

37, 40

 

≥Check the “Network” and “BD-Live Internet Access” settings.

VIERA CAST does not operate

≥Is the network connection correct?

14

or connect.

≥Image of the video contents may be incomplete or may not display depending on how busy

—

 

the environment or the connected line is.

 

While using my PC, I cannot

≥Does your Internet Service Provider (ISP) or service contract prevent multiple terminals

—

connect to the network.

connecting at the same time? Check the content of your contract.

 

Other difficulties with playback

 

 

 

 

Audio and video momentarily

≥This occurs between playlist chapters or scenes ([AVCHD]).

—

pause.

≥When playing a title recorded on both layers, the unit automatically switches between layers

—

 

and plays the title in the same way as a normal program. However, video and audio may

 

 

momentarily cut out when the unit is switching layers.

 

BD-Video or DVD-Video is not

≥Ensure the disc is for the correct BD-Video region code or DVD-Video region number, and is

Cover

played.

not defective.

37

 

≥You have set a ratings level to limit BD-Video or DVD-Video play. Change this setting.

 

≥Some BD-Video can only be output with HDMI.

—

Picture-in-picture is not played

≥Confirm whether the disc supports picture-in-picture.

—

with BD-Video.

 

 

The BD-Live is not played with

≥Confirm whether the disc supports the BD-Live.

22

BD-Video.

≥The inserted SD card does not have sufficient available capacity.

22

 

≥The SD card is write-protected.

43

 

≥Sub contents copied to an SD card are provided by the disc producer as a part of the

22

 

BD-Video content. Even if you record images and audio onto an SD card, it cannot be played

 

 

as a BD-Live.

 

Alternative soundtrack and

≥The languages are not recorded on the disc.

—

subtitles cannot be selected.

≥You may not be able to use the on-screen menu to change the soundtrack and subtitles on

19

 

some discs. Use the disc’s menus to make changes.

 

No subtitles.

≥Subtitles are not recorded on the disc.

—

 

≥Turn the subtitles on. Set “Subtitle” on the on-screen menu to “On”.

35

 

≥When progressive output is on, closed captions cannot be displayed.

—

The subtitles overlap closed

≥Turn off the subtitles or turn off the closed caption setting on the TV.

35

captions recorded on discs.

 

 

Angle cannot be changed.

≥Angles can only be changed during scenes where different angles are recorded.

—

The resume play function does

≥Memorized positions are canceled when

—

not work.

– pressing [∫STOP] several times.

 

 

– opening the disc tray.

—

 

≥The resume play function may not work depending on the disc.

 

≥[BD-V]: On BD-Video discs including BD-J, the resume play function does not work.

—

When other Panasonic products respond to this remote control

Change the remote control code on this unit and the remote control (the two must match) if you place other Panasonic products close together.

1)Press [BD/SD] to select “BD/DVD” or “SD”.

2)While stopped, press [SETUP].

3)Press [3, 4] to select “Others” and press [OK].

4)Press [3, 4] to select “Remote Control Code” and press [OK].

5)Press [3, 4] to select the code (1 or 2) and press [OK].

6)To change the code on the remote control

While pressing [OK], press and hold the numbered button ([1] or [2] ) for more than 5 seconds.

7)Press [OK].

Remote Control Code

Set Code 1

Set Code 2

Press [] and [OK] together for more than 5 seconds on the remote.

When the following indicator appears on the unit’s display and you are unable to operate the unit

NOTE

e.g.

The unit’s remote control code

Press and hold [OK] and the indicated number button at the same time for more than 5 seconds.

Reference

RQT9508

50

Page 49 Page 51
Image 50
Page 49 Page 51
Contents BD-Video Region management informationIf you have any questions contact DVD-Video ExampleAccessories Following Applies only in the U.S.A If you see this symbolFCC Note Following Applies only to the U.S.A. and CanadaTable of contents Batteries Control reference guide remote controlPreparing the remote control UseFront panel Standby/on switch Power Í/IControl reference guide main unit Rear panel terminalsPreparation Speaker assembly optionAssembling the speakers Preventing the front speakers from fallingIf irregular coloring occurs on your TV Setup examplePositioning Do do Not TipsSheet of speaker cable Speaker cable for front Setup exampleSpeaker connections Front speaker LOptional connections TV connectionsConnections with a video cable Video OUTConnections with an Hdmi cable Necessary SettingsConnections with a component video cable HdmiSTB, VCR, DVD recorder, etc Connections to a Set Top Box, etc≥Do not connect through the video cassette recorder Press EXT-IN several times to select D-IN 2 DigitalUsing an FM/AM outdoor antenna optional Radio antenna connectionsAC power supply cord connection Broadband Network ConnectionsBT300 \BT303\ BT200 Preparation Basic settings for the systemPress OK to finish the Smart Setup / Easy Setup Press 3, 4 to select the item and press OK Showing Start menuPress Í to turn on the unit Press Start Selecting the playback source Selecting the source with the remote controlPress 3, 4 to make the setting Selecting the source from the Start menuChanging the sound modes Adjusting speaker level during playEnjoying sound from all speakers and various sound effects Enjoying surround sound effectsPress Í to turn on the unit Insert the media. B see above VOL Press to adjust the volumeBasic operations Press to mute the soundOK Frame-by-frame Basic operationsSearch Search Search/Slow-motion Chapter playback DVD-VRPlaying video recorded on a Video Camera or Video Recorder Insert an SD card Enjoying BD-LIVE or Bonusview in BD-VideoEnjoying BD-Live discs with Internet Insert the discPress 3, 4, 2, 1 to select the album and press OK Playing still picturesInsert a disc or an SD card Press 3, 4, 2, 1 to select the still picture and press OKPlaying still pictures Useful functions during still picture playInsert a disc Playing music continuously even after turning off power toPlaying music Press 3, 4 to select the track and press OKListening to the Radio Setting up the radioListening/confirming the preset channels Available settings Adjusting the soundMaking settings for digital audio input Press Status several times to select ModeWhat you can do with Hdavi Control Setting the TV audio for Viera Link Hdavi ControlLinked operations with the TV Speaker controlEasy control only with Viera remote control Using the iPod IPod ConnectionSwitch the TV input to video Enjoy music/video Extended mode Press iPod to select IpodEnjoy photos Simple mode Press 3, 4 to select an item and press OKPress BD/SD to select BD/DVD or SD Press Viera Cast Enjoying Viera CasttmFirmware updating Press 3, 4, 2, 1 to select the item and press OKSetting the IP address Network settingsTesting of IP Address/DNS Settings Setting the DNS-IPNetwork settings What you can change with the on-screen menu Changing settings with the on-screen menuOn-screen menu operations Video Changing settings with the on-screen menuPlay AudioSummary of settings Changing the unit’s settingsSetup menu operations Press BD/SD to select BD DVD or SDDTS/DTS-HD Changing the unit’s settingsDisplay TV / Device Connection DST NetworkOthers Delay time Speaker settingsAdjusting the sound lag between speakers Volume Channel balanceRecorded discs Disc and card informationPackaged discs To dispose or transfer this unit MaintenanceDisc and card handling MP3 Jpeg About MP3/JPEG filesStructure of folders that can play back on this unit Connections Wireless connections optionalMaking the wireless link Insert the cable Attaching to a wallFront BT300, BT303 speaker From the bottomPower Troubleshooting guideTo reset this unit OperationTV screen and video Troubleshooting guideDisplays Card Optional wireless system SH-FX70Sound IPod operationsOther difficulties with playback On the unit’s display MessagesOn the TV Messages Frequently asked questionsSetup SD cardLanguage code list LicensesDTS-HD GlossaryBD-J MPEG4 AVC/H.264 Viera CastSpecifications DVD-RW Playable disc BD-VideoBD-ROM VersionDVD-R/DVD-R DL CD-DA CD-R/CD-RW CD-DA, JPEG*6, MP3Centralized Factory Service Center Limited Warranty Only for U.S.A. and Puerto RicoPanasonic Home Theater Limited Warranty Panasonic Canada Inc Limited Warranty only for CanadaProduct Service Index
Top Page Image Contents