Panasonic SC-BT200 Network settings, Testing of IP Address/DNS Settings, Setting the IP address

Page 33

Network settings

These settings are used if you will connect this unit to the Internet.

≥The connection to the Internet may take time or the Internet may not be connected depending on the connection environment. (> 40) It is required that you use a broadband connection.

Preparation

≥Connect to a broadband network. (> 14)

Testing of “IP Address/DNS Settings”

Always test the connection when a LAN cable is connected.

1Press [BD/SD] to select “BD/DVD” or “SD”.

2 Press [SETUP].

3 Press [3, 4] to select “Network” and press [OK].

4 Press [3, 4] to select “IP Address/DNS Settings” and press [OK].

5 Press [3, 4] to select “Connection Test” and press [OK].

IP Address/DNS Settings

 

Connection Test

 

IP Address Auto Configuration ( DHCP )

On

IP Address

 

Subnet Mask

 

Default Gateway

 

DNS Auto Configuration ( DHCP )

On

Primary DNS

 

Secondary DNS

 

Auto Detect Connection Speed

On

Connection Speed Setting

 

OK

 

RETURN

 

“Testing...”:The test is in progress.

“Pass”:

The connection is completed.

 

Press [RETURN] to exit.

“Fail”:

Please check the connection and settings.

≥Perform the “Connection Test” also when any change was

made to the “IP Address/DNS Settings”.

NOTE

≥If the connection test fails, it may be necessary to set the MAC address of this unit at the router side. The MAC address can be displayed by pressing [SETUP] and selecting “Network”.

Network

IP Address/DNS Settings

Proxy Server Settings

Network Service

MAC Address: xx-xx-xx-xx-xx-xx

OK

RETURN

Setting the IP address

In most cases, default settings can normally be used without making any changes.

Set the IP address only when the router has no DHCP server functions or when the router’s DHCP server function is disabled.

After performing steps 1 to 4 (D left)

5Press [3, 4] to select “IP Address Auto

Configuration ( DHCP )” and press [2, 1] to select “Off”.

6Press [3, 4] to select “IP Address”, “Subnet Mask” or “Default Gateway” and press [OK].

7Enter numbers with the numbered buttons and press [OK].

≥After checking the specifications for your broadband router, enter each number.

If the number is unknown, then check the number of other devices such as personal computers connected via a LAN cable. Assign a different number from those of other devices for the “IP Address” and the same number for others.

≥If a wrong number is entered, then press [CANCEL].

8Press [2, 1] to select “Yes” and press [OK].

≥The numeric input range is between 0 and 255.

NOTE

Setting the DNS-IP

In most cases, default settings can normally be used without making any changes.

When setting an assigned DNS server from your Internet service provider, perform the following settings.

After performing steps 1 to 4 (D left)

5Press [3, 4] to select “DNS Auto

Configuration ( DHCP )” and press [2, 1] to select “Off”.

6Press [3, 4] to select “Primary DNS” or

“Secondary DNS”and press [OK].

7Enter numbers with the numbered buttons and press [OK].

≥Follow the instructions given by your Internet service provider and enter the numbers.

If the number is unknown, then check the number of other devices such as personal computers connected via a LAN cable and assign the same number.

≥If a wrong number is entered, then press [CANCEL].

Primary DNS

Please input Primary DNS and press

[OK]. Press [CANCEL] to delete the selected character. To clear this setting, delete all characters and press [OK].

192

.

1

 

 

.

 

.

 

 

- 9

Number

 

 

 

0

 

 

 

8Press [2, 1] to select “Yes” and press [OK].

≥The numeric input range is between 0 and 255.

Advanced operations

NOTE

RQT9508

33

Image 33
Contents If you have any questions contact Region management informationBD-Video DVD-Video ExampleAccessories FCC Note If you see this symbolFollowing Applies only in the U.S.A Following Applies only to the U.S.A. and CanadaTable of contents Preparing the remote control Control reference guide remote controlBatteries UseControl reference guide main unit Standby/on switch Power Í/IFront panel Rear panel terminalsAssembling the speakers Speaker assembly optionPreparation Preventing the front speakers from fallingPositioning Setup exampleIf irregular coloring occurs on your TV Do do Not TipsSpeaker connections Setup exampleSheet of speaker cable Speaker cable for front Front speaker LConnections with a video cable TV connectionsOptional connections Video OUTConnections with a component video cable Necessary SettingsConnections with an Hdmi cable Hdmi≥Do not connect through the video cassette recorder Connections to a Set Top Box, etcSTB, VCR, DVD recorder, etc Press EXT-IN several times to select D-IN 2 DigitalRadio antenna connections Using an FM/AM outdoor antenna optionalBroadband Network Connections AC power supply cord connectionBasic settings for the system Press OK to finish the Smart Setup / Easy SetupBT300 \BT303\ BT200 Preparation Showing Start menu Press Í to turn on the unit Press StartPress 3, 4 to select the item and press OK Press 3, 4 to make the setting Selecting the source with the remote controlSelecting the playback source Selecting the source from the Start menuEnjoying sound from all speakers and various sound effects Adjusting speaker level during playChanging the sound modes Enjoying surround sound effectsBasic operations VOL Press to adjust the volumePress Í to turn on the unit Insert the media. B see above Press to mute the soundSearch Search Search/Slow-motion Basic operationsOK Frame-by-frame Chapter playback DVD-VRPlaying video recorded on a Video Camera or Video Recorder Enjoying BD-Live discs with Internet Enjoying BD-LIVE or Bonusview in BD-VideoInsert an SD card Insert the discInsert a disc or an SD card Playing still picturesPress 3, 4, 2, 1 to select the album and press OK Press 3, 4, 2, 1 to select the still picture and press OKUseful functions during still picture play Playing still picturesPlaying music Playing music continuously even after turning off power toInsert a disc Press 3, 4 to select the track and press OKSetting up the radio Listening/confirming the preset channelsListening to the Radio Making settings for digital audio input Adjusting the soundAvailable settings Press Status several times to select ModeLinked operations with the TV Setting the TV audio for Viera Link Hdavi ControlWhat you can do with Hdavi Control Speaker controlEasy control only with Viera remote control IPod Connection Using the iPodEnjoy photos Simple mode Enjoy music/video Extended mode Press iPod to select IpodSwitch the TV input to video Press 3, 4 to select an item and press OKFirmware updating Enjoying Viera CasttmPress BD/SD to select BD/DVD or SD Press Viera Cast Press 3, 4, 2, 1 to select the item and press OKTesting of IP Address/DNS Settings Network settingsSetting the IP address Setting the DNS-IPNetwork settings Changing settings with the on-screen menu On-screen menu operationsWhat you can change with the on-screen menu Play Changing settings with the on-screen menuVideo AudioSetup menu operations Changing the unit’s settingsSummary of settings Press BD/SD to select BD DVD or SDChanging the unit’s settings DisplayDTS/DTS-HD TV / Device Connection Network OthersDST Adjusting the sound lag between speakers Speaker settingsDelay time Volume Channel balanceDisc and card information Packaged discsRecorded discs Maintenance Disc and card handlingTo dispose or transfer this unit About MP3/JPEG files Structure of folders that can play back on this unitMP3 Jpeg Wireless connections optional Making the wireless linkConnections Front BT300, BT303 speaker Attaching to a wallInsert the cable From the bottomTo reset this unit Troubleshooting guidePower OperationTroubleshooting guide DisplaysTV screen and video Sound Optional wireless system SH-FX70Card IPod operationsOther difficulties with playback Messages On the TVOn the unit’s display Setup Frequently asked questionsMessages SD cardLicenses Language code listGlossary BD-JDTS-HD Viera Cast MPEG4 AVC/H.264Specifications DVD-R/DVD-R DL Playable disc BD-VideoBD-ROM VersionDVD-RW CD-DA CD-R/CD-RW CD-DA, JPEG*6, MP3Limited Warranty Only for U.S.A. and Puerto Rico Panasonic Home Theater Limited WarrantyCentralized Factory Service Center Limited Warranty only for Canada Product ServicePanasonic Canada Inc Index