Panasonic SC-BT303 warranty Sound, Card, IPod operations, Radio, Optional wireless system SH-FX70

Page 49

Sound

 

Page

 

No sound.

≥Turn the volume up.

19

 

Low volume.

≥Turn the muting off.

19

 

Distorted sound.

≥Check connections to speakers and other equipment.

9 to 14

 

Cannot hear the desired audio

≥Select the corresponding source.

17

 

type.

≥Press [AUDIO] to select the audio.

20

 

 

≥Ensure the speaker settings for your speakers are correct.

41

 

 

≥When “BD-Video Secondary Audio” is set to “On”, Dolby TrueHD, Dolby Digital Plus,

38

 

 

DTS-HD Master Audio and DTS-HD High Resolution Audio are output as Dolby Digital or

 

 

 

DTS Digital Surround.

—

 

 

≥Re-master will not work when a bitstream signal is output from the HDMI AV OUT terminal.

 

 

≥Audio may not be heard when more than 2 devices are connected with HDMI cables.

—

 

 

Reduce the number of connected devices.

39

 

 

≥To output audio to a device connected with an HDMI cable, set “HDMI Audio Output” to “On”

 

 

in the Setup menu.

—

 

 

≥Depending on the connected equipment, the sound may be distorted if this unit is connected

 

 

with an HDMI cable.

12, 27

 

 

≥The multi-channel audio from a device connected to the TV is not output in it’s original

 

 

multi-channel form.

 

 

 

– If the device has an optical audio output terminal, connect the device to this unit’s

 

 

 

“OPTICAL 2(STB)” terminal.

 

 

Humming is heard during play.

≥An AC power supply cord or fluorescent light is near the main unit. Keep other appliances and

—

 

 

cables away from the main unit.

 

 

 

 

 

 

No surround sound.

≥Press [SURROUND] to select a surround effect.

18

 

Cannot switch audio.

≥There are discs for which audio cannot be changed because of how the disc was created.

—

 

 

≥When audio is output from the HDMI AV OUT terminal, you cannot switch the audio if “Dolby

38

 

 

D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD” is set to “Bitstream”. Set “Dolby D/Dolby D +/

 

 

 

Dolby TrueHD” or “DTS/DTS-HD” to “PCM”.

 

 

No sound from the TV

≥Press [EXT-IN] to select the corresponding source.

17

 

Card

 

 

 

The capacity of the SD card

≥When a BD-Video that supports the BD-Live is used, and an SD card is in the slot, data may

22

 

decreased.

be written to the SD card. Erase the data by using “BD-Video Data Erase”, format the card or

 

 

 

use a new card.

 

 

Music on an SD card cannot be

≥Data that can be played from an SD card are AVCHD, MPEG2 and JPEG data.

43

 

played.

 

 

 

The contents of the card

≥The card is not compatible or the contents on the card may be damaged.

43

 

cannot be read.

≥Turn off and then turn on the unit again.

—

 

iPod operations

 

 

 

Cannot charge or operate.

≥Check that the iPod is connected firmly.

30

 

 

≥The battery of the iPod is depleted. Charge the iPod, and then operate again.

—

 

Cannot display iPod videos/

≥Make sure that TV is connected to the VIDEO OUT terminal on this unit.

10

 

photos on the TV.

≥Operate the iPod menu to make the appropriate video/photo output settings for your TV.

—

 

 

(Refer to operating instructions for your iPod.)

 

 

The TV input channel

≥When the main unit is connected with an “HDAVI Control” compatible TV and VIDEO IN is

—

 

unintentionally changes to

selected for iPod video or photo playback, the TV input channel will automatically change to

 

 

HDMI input.

the HDMI input channel when [START] is pressed.

 

 

 

– Re-select the TV’s VIDEO IN input channel.

 

 

Radio

 

 

 

Distorted sound or noise is

≥Adjust the position of the FM or AM antenna.

—

 

heard. “ST” flickers or does not

≥Use an outdoor antenna.

13

 

light.

 

 

 

A beat sound is heard.

≥Turn the TV off or move it away from the unit.

—

 

A low hum is heard during AM

≥Separate the antenna from other cables.

—

 

broadcasts.

 

 

 

Optional wireless system (SH-FX70)

 

 

No power.

≥Ensure the AC power supply cord of the wireless system is connected properly.

—

 

The indicator on the wireless

≥Turn the wireless system off and then back on.

—

 

system does not turn green

 

 

 

even though [I/D SET] is

 

 

 

pressed and pairing completed.

 

 

 

The wireless link indicator

≥There is no link between the main unit and the wireless system. Turn the wireless system off

—

 

(e.g., “ [W1] ” or an indicator) is

and then back on. Alternatively, turn the wireless system off, disconnect the AC power supply

 

 

flashing.

cord, and then reconnect it.

 

 

The wireless link indicator

≥Check that the main unit is turned on, and the wireless system is turned on.

—

 

(e.g., “ [W1] ” or an indicator)

≥Ensure that the digital transmitter is fully inserted into the slot of the main unit.

45

 

does not light.

≥Ensure the surround sound setting on the main unit.

—

Reference

The wireless link indicator

≥There is a power supply problem. Consult the dealer.

—

keeps flashing between red

 

 

 

and green.

 

 

 

RQT9508

49

Page 48 Page 50
Image 49
Page 48 Page 50
Contents If you have any questions contact Region management informationBD-Video DVD-Video ExampleAccessories FCC Note If you see this symbolFollowing Applies only in the U.S.A Following Applies only to the U.S.A. and CanadaTable of contents Preparing the remote control Control reference guide remote controlBatteries UseControl reference guide main unit Standby/on switch Power Í/IFront panel Rear panel terminalsAssembling the speakers Speaker assembly optionPreparation Preventing the front speakers from fallingPositioning Setup exampleIf irregular coloring occurs on your TV Do do Not TipsSpeaker connections Setup exampleSheet of speaker cable Speaker cable for front Front speaker LConnections with a video cable TV connectionsOptional connections Video OUTConnections with a component video cable Necessary SettingsConnections with an Hdmi cable Hdmi≥Do not connect through the video cassette recorder Connections to a Set Top Box, etcSTB, VCR, DVD recorder, etc Press EXT-IN several times to select D-IN 2 DigitalRadio antenna connections Using an FM/AM outdoor antenna optionalBroadband Network Connections AC power supply cord connectionPress OK to finish the Smart Setup / Easy Setup Basic settings for the systemBT300 \BT303\ BT200 Preparation Press Í to turn on the unit Press Start Showing Start menuPress 3, 4 to select the item and press OK Press 3, 4 to make the setting Selecting the source with the remote controlSelecting the playback source Selecting the source from the Start menuEnjoying sound from all speakers and various sound effects Adjusting speaker level during playChanging the sound modes Enjoying surround sound effectsBasic operations VOL Press to adjust the volumePress Í to turn on the unit Insert the media. B see above Press to mute the soundSearch Search Search/Slow-motion Basic operationsOK Frame-by-frame Chapter playback DVD-VRPlaying video recorded on a Video Camera or Video Recorder Enjoying BD-Live discs with Internet Enjoying BD-LIVE or Bonusview in BD-VideoInsert an SD card Insert the discInsert a disc or an SD card Playing still picturesPress 3, 4, 2, 1 to select the album and press OK Press 3, 4, 2, 1 to select the still picture and press OKUseful functions during still picture play Playing still picturesPlaying music Playing music continuously even after turning off power toInsert a disc Press 3, 4 to select the track and press OKListening/confirming the preset channels Setting up the radioListening to the Radio Making settings for digital audio input Adjusting the soundAvailable settings Press Status several times to select ModeLinked operations with the TV Setting the TV audio for Viera Link Hdavi ControlWhat you can do with Hdavi Control Speaker controlEasy control only with Viera remote control IPod Connection Using the iPodEnjoy photos Simple mode Enjoy music/video Extended mode Press iPod to select IpodSwitch the TV input to video Press 3, 4 to select an item and press OKFirmware updating Enjoying Viera CasttmPress BD/SD to select BD/DVD or SD Press Viera Cast Press 3, 4, 2, 1 to select the item and press OKTesting of IP Address/DNS Settings Network settingsSetting the IP address Setting the DNS-IPNetwork settings On-screen menu operations Changing settings with the on-screen menuWhat you can change with the on-screen menu Play Changing settings with the on-screen menuVideo AudioSetup menu operations Changing the unit’s settingsSummary of settings Press BD/SD to select BD DVD or SDDisplay Changing the unit’s settingsDTS/DTS-HD TV / Device Connection Others NetworkDST Adjusting the sound lag between speakers Speaker settingsDelay time Volume Channel balancePackaged discs Disc and card informationRecorded discs Disc and card handling MaintenanceTo dispose or transfer this unit Structure of folders that can play back on this unit About MP3/JPEG filesMP3 Jpeg Making the wireless link Wireless connections optionalConnections Front BT300, BT303 speaker Attaching to a wallInsert the cable From the bottomTo reset this unit Troubleshooting guidePower OperationDisplays Troubleshooting guideTV screen and video Sound Optional wireless system SH-FX70Card IPod operationsOther difficulties with playback On the TV MessagesOn the unit’s display Setup Frequently asked questionsMessages SD cardLicenses Language code listBD-J GlossaryDTS-HD Viera Cast MPEG4 AVC/H.264Specifications DVD-R/DVD-R DL Playable disc BD-VideoBD-ROM VersionDVD-RW CD-DA CD-R/CD-RW CD-DA, JPEG*6, MP3Panasonic Home Theater Limited Warranty Limited Warranty Only for U.S.A. and Puerto RicoCentralized Factory Service Center Product Service Limited Warranty only for CanadaPanasonic Canada Inc Index
Top Page Image Contents