Panasonic SC-BT303, SC-BT200, SC-BT203 warranty Network, Others, Dst

Changing the unit’s settings

To select these settings, perform steps 1 to 5 (> 37)

	“Network”
	IP Address/DNS Settings (> 33)
	≥Press [OK] to show the following settings.
		Connection Test	— — — —
		IP Address Auto Configuration ( DHCP )	≥On		≥Off
		IP Address	— — —. — — —. — — —. — — —
		Subnet Mask	— — —. — — —. — — —. — — —
		Default Gateway	— — —. — — —. — — —. — — —
		DNS Auto Configuration ( DHCP )	≥On		≥Off
		Primary DNS	— — —. — — —. — — —. — — —
		Secondary DNS	— — —. — — —. — — —. — — —
		Auto Detect Connection Speed	≥On		≥Off
		Connection Speed Setting	≥10BASE Half Duplex			≥10BASE Full Duplex
		This is enabled only when “Auto Detect Connection Speed” is	≥100BASE Half Duplex			≥100BASE Full Duplex
		turned “Off”.
	Proxy Server Settings (> 34)
	≥Press [OK] to show the following settings.
		Reset to factory preset	≥Yes	≥No
		Proxy Address	(The initial setting is blank.)
		Proxy Port Number	(The initial setting is “0”.)
		Connection Test	— — — —
	Network Service (VIERA CAST) (> 32)
	≥Press [OK] to show the following settings.
		Network Lock	≥On		≥Off
		You can restrict using VIERA CAST.	Changing settings (When “On” is selected)
		Follow the on-screen instructions. Enter a 4-digit password with	≥Change Password
		the numbered buttons when the password screen is shown. It
		will be the common password for “DVD-Video Ratings”,
		“BD-Video Ratings” and “Network Lock”.
		≥Do not forget your password.
		Audio Auto Gain Control	≥On		≥Off
		Volume that is different depending on the contents is adjusted
		automatically to the standard volume while using the VIERA
		CAST.
		≥Depending on contents, this function effect will not work.
		≥Select “Off” when the audio is warped.
		≥This function has no effect when Dolby PL II is activated. (> 18)
		Reduce to Screen Size	≥On		≥Off
		The screen is displayed reduced so the displayed screen of the
		VIERA CAST does not get truncated.
operations		Time Zone	≥GMT s12 to r12
		By selecting the time zone, it is possible to set the unit’s time to	(The initial setting is “s5”.)
		match your location.	GMT s5 l EST (Eastern Standard Time)
		≥Some VIERA CAST contents require the time zone to be set.	GMT s6 l CST (Central Standard Time)
		Set the time zone if necessary.	GMT s7 l MST (Mountain Standard Time)
Advanced		Select “On” when using Daylight Saving time.	GMT s8 l PST (Pacific Standard Time)
			GMT s9 l AKST (Alaska Standard Time)
			GMT s10 l HST (Hawaii Standard Time)
		DST	≥On		≥Off
	MAC Address (> 33)
	Displays the “MAC Address” of this unit.
	“Others”
	Off Timer		≥2 Hours		≥6 Hours		≥Off
	Select how long the unit remains on when it is not being used.
	≥Effective only when “BD/DVD” or “SD” is selected as source.
	Remote Control Code (> 50)		≥Set Code 1		≥Set Code 2
	Restore Default Settings		≥Yes		≥No
	This returns all values in the Setup menu and the on-screen
	menu, except for “Remote Control Code”, “On-screen Language”,
	“IP Address/DNS Settings”, “Proxy Server Settings”, “Network
	Service”, “DVD-Video Ratings” and “BD-Video Ratings” to the
	default settings.
	Firmware Update (> 32)
	≥Press [OK] to show the following settings.
		Automatic Update Check	≥On		≥Off
		When this equipment remains connected to the Internet, it will
		check for the latest firmware version when it is turned on and
		you can update it if necessary.
		Update Now	≥Yes		≥No
RQT9508		You can update the firmware manually.
40