Intel SBX82 manual Abbreviated list of Post error messages

Page 74

Table 6. Abbreviated list of POST error messages (continued)

POST message

Failing device or problem found

Suggested action

 

 

 

00180xxx

A PCI adapter requested a

Start the Configuration/Setup Utility program and

 

resource that is not available.

make sure that the resources needed by the PCI

 

 

adapter are available.

 

 

 

01295085

The blade server failed the ECC-

Have the system board serviced.

 

checking hardware test.

 

 

 

 

012980xx

Data for processor x

Download and install the latest level of BIOS code.

012981xx

 

 

 

 

 

01298200

processor speed mismatch

Install processors with identical speeds.

 

 

 

I9990305

POST could not find an operating

Install an operating system.

 

system.

 

 

 

 

60

Intel Server Compute Blade SBX82 Installation and User’s Guide

Image 74
Contents Intel Server Compute Blade SBX82 Disclaimer Contents Configuring the blade server Safety and regulatory information General Safety Electrical SafetyVii Handling electrostatic discharge-sensitive devices To Connect To Disconnect Use safe practices when lifting Regulatory specifications and disclaimers Safety complianceElectromagnetic compatibility notices USA Electromagnetic compatibility ECMXiii Electromagnetic compatibility notices InternationalJapan EMC Compatibility RRL Korea English translation of the notice above Device User’s InformationPage Blade server release levers Label placement on the Sbce unit Features and specifications Reliability, availability, and serviceability featuresIntel Server Compute Blade SBX82 features Intel Server Compute Blade SBX82 specifications Power throttlingEnvironment Service ProcessorProcessor Size Electrical Input Memory Integrated functionsMajor components of the blade server Related publicationsPage Page Using power, controls, jumpers, switches, and indicators Turning on the blade serverTurning off the blade server Understanding the control panel and LEDs NumLock NumLock bladeservernumber Enter Using system board switches System board illustrationUsing switch block 2 SW2 Switch block 2 SW2 and settingsNMI MIS Sbrd Temp MIS Handling static-sensitive devices Installation guidelinesSystem reliability considerations Installing and removing the blade server from the Sbce unit Opening the blade server coverRemoving the blade server bezel assembly StatementInstalling a Scsi hard disk drive Installing a Scsi driveInstalling memory modules Removing a Scsi hard disk driveInstalling Dimms Installing an additional processor Page Lever fully open Lever closed Installing an I/O expansion card Installing a small form-factor expansion card Installing a small form-factor I/O card in the blade server Installing a standard form-factor expansion card IInstalling the Intel Blade Server Scsi Expansion Module SbescsiInstalling a Scsi storage expansion unit Cover pins Scsi IDs for the hard disk drives in the expansion unit Installing a Scsi disk drive Page Opening the expansion unit cover Installing an I/O expansion card Installing an I/O expansion card in the expansion unit Replacing the battery Battery location Completing the installation Installing the blade server bezel assembly Closing the blade server cover Installing the blade server in the Sbce unit Updating your blade server configuration Input/output connectors and devices Configuration/Setup Utility menu choices Using the Configuration/Setup Utility programStarting the Configuration/Setup Utility program Devices and I/O Ports System InformationProduct Data Remote Console RedirectionBaseboard Management Controller BMC Settings Advanced SetupMemory Settings BMC Network ConfigurationUsing passwords Using the PXE boot agent utility program Firmware updatesConfiguring the Gigabit Ethernet controllers Configuring a Scsi RAID array Blade server Ethernet controller enumerationUsing the LSI Logic Configuration Utility program Diagnostic programs and error messages Diagnostic tools overviewTroubleshooting charts Light Path Diagnostics featurePost beep code descriptions Repeating long beepsPost error messages Abbreviated list of Post error messagesAbbreviated list of Post error messages Processor problems Troubleshooting chartsMemory problems Monitor problems Mm 3Mouse problems Network connection problemsOption problems Power problemsDiagnosing problems using Light Path Diagnostics Light path diagnosticsService processor problems Light Path Diagnostics LEDsLight Path Diagnostics table Light path diagnostics Page Getting help and information from the World Wide Web Using the documentationBefore you call Page Index Password Scsi RAID