Graco ti13586a, ti13585a important safety instructions Service, Disassembly

Page 23

Service

Service

NOTE: Air Section Repair Kit 288171 and Fluid Section Repair Kit 24B675 are available for purchase separately. Numbers in parenthe- sis in the text refer to the reference numbers in the figures and in the parts list.

Disassembly

1.Perform Pressure Relief Procedure, page 18.

2.Unscrew the four screws (13) and remove the gun from the manifold.

3.Remove the air cap retainer (25) and air cap (24).

4

13

23

24, 25

ti13590a

FIG. 16

4.Remove the piston cap (4) from the piston housing (1). Remove the springs (6, 7).

5.Using a 1/16 in. hex wrench loosen the fluid needle set screw (30). Remove the needle stop (29).

6.Pull the fluid needle (5) out of the back of the gun.

7.Check the fluid needle (5) for damage or excessive wear. Replace the needle tip (5a) or the entire needle if necessary.

8.Remove nozzle (23). Check nozzle and o-ring (36) for damage.

36

ti8198a

FIG. 17

9.Remove the piston. Using a pliers, pull the piston (3) out of the piston housing (1).

10.Unscrew the two screws (14) and separate the fluid housing (2) and the piston housing

(1). Remove gasket (12) only if it needs to be replaced.

6

29 7

14

2

30

3

1

ti13591a

FIG. 18

11.Remove the packing nut (16) with a wrench.

12.Remove the fluid packing (17) from the nut (16). Discard the old fluid packing.

313516G

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Automatic AirPro Spray Guns Important Safety InstructionsModels ContentsFire and Explosion Hazard Pressurized Equipment Hazard General Metal Applications Selection ChartsHvlp Guns High Wear ApplicationsWood Applications Gun SelectionConventional Guns Proper Needle/Nozzle SelectionAir Caps Atomizing Air Fan Air Air FlowMaximum HVLP/Compliant inlet manifold pressure Circulating System InstallationVentilate Spray Booth Configure Gun and ManifoldGround System Install Air FittingsStationary Support Mount GunReciprocating Arm Rod Mount Retrofit Adapter Plate Mount Retrofit Adapter PlateConnect Fluid Hose SetupConnect Air Line Position Air Cap Flush Spray GunFan Air psi Adjust Spray PatternSuggested Starting Settings Atomization Air Pressure Regulator Incorrect Pressure Relief ProcedureOperation Apply FluidDaily Gun Care Clean and Flush Gun General System MaintenanceProblem Cause Solution TroubleshootingGeneral Troubleshooting Spray Pattern Troubleshooting Disassembly ServicePart No A749 Gun Shown Fluid packings ReassemblyParts Gasket General Metal Applications Repair KitsWood Applications High Wear Applications114101 103 107 105108 Part No C342 Side Fluid Ports and Fan Adjustment Valve107 101 114 103 106 Accessories Tips Hvlp Pressure Verification KitInline Fluid Filter 24B707 Spray Tip FiltersManifold Model 288221, All Gun Models DimensionsManifold Models 288217 or 288218, All Gun Models Manifold Model 288160 or 288211, All Gun Models Manifold Model 288223 or 24C342, All Gun ModelsMounting Hole Layouts 23.4 mm 10.2 mm 53.3 mm 50 in .7 mm mounting hole 216 225 58.4 mm Retrofit Adapter Plate Sound Data Technical DataTriggering Speed Graco Information Graco Standard Warranty

ti13586a, ti13585a specifications

The Graco TI13586A and TI13585A are advanced airless paint sprayers designed for both professional contractors and serious DIY enthusiasts. These models stand out for their ability to deliver high-quality finishes quickly and efficiently, making them ideal for a wide range of painting tasks, from residential projects to large-scale commercial applications.

One of the main features of the Graco TI13586A and TI13585A is their powerful motor. These sprayers come equipped with a robust 0.75 HP pump that can generate high pressure, allowing for thorough and consistent coverage on various surfaces. This motor works efficiently to atomize the paint, producing a fine spray pattern essential for achieving a smooth finish without the need for excessive back-and-forth motion.

Another notable characteristic is the ease of use. The Graco TI13586A and TI13585A include an easy-to-operate control system that allows users to adjust the pressure settings, ensuring optimal spray control for various painting materials and techniques. This versatility is complemented by the FlexLiner container system, which reduces waste and allows for easy cleaning between jobs.

In terms of portability, these models are designed with mobility in mind. The lightweight construction, along with a durable cart that features large wheels, makes it easy to transport the sprayers to different job sites. Whether you're navigating stairs or uneven terrain, the design ensures that transportation remains hassle-free.

Both models are compatible with a variety of coatings, including latex paints, stains, and sealers, enhancing their adaptability for numerous applications. They also leverage Graco's proven Airless Technology, which ensures a consistent finish by using a piston pump system that allows for continuous operation without the risk of clogging. This technology results in faster project completion times, which is a significant advantage for contractors on a tight schedule.

Additionally, safety features such as a settings lock and the built-in pressure relief valve contribute to user protection while enhancing the overall painting experience. This focus on safety and efficiency ensures that both the TI13586A and TI13585A maintain Graco's reputation for quality and reliability in the airless spraying market.

In summary, both the Graco TI13586A and TI13585A represent powerful, user-friendly solutions for quality airless painting. Their effective motor, adjustable pressure settings, portability, and compatibility with various materials make them excellent choices for anyone looking to achieve professional-level results with ease and efficiency.
Top Page Image Contents