Graco ti13586a, ti13585a General Troubleshooting, Problem Cause Solution

Page 21

Troubleshooting

Troubleshooting

NOTE: Check all possible remedies in the trou- bleshooting charts before disassembling the gun.

Some improper patterns are caused by the improper balance between air and fluid. Refer to Spray Pattern Troubleshooting, page 22.

General Troubleshooting

Problem

Cause

Solution

 

 

 

 

 

 

Fluid leakage through venting

Worn packing (17) or needle (5).

Replace packing or needle.

holes.

 

 

 

 

 

Air leakage through venting hole.

Worn o-ring (9) or gasket (15).

Check and replace parts as

 

 

needed.

 

 

 

Air leakage from back of gun.

Worn o-rings (8, 9).

Replace o-rings.

 

 

 

Air does not trigger.

Piston stem is disconnected from

Replace piston assembly.

 

main body of piston assembly (3).

 

 

Cylinder air pressure is too low.

Increase cylinder air pressure to

 

 

50 psi.

 

 

 

Air does not shut off.

Piston assembly not seating

Clean/service piston assembly.

 

properly.

Replace worn or swollen o-rings.

 

Broken return spring (7).

Replace return spring.

 

Swollen o-ring (8).

Replace o-rings.

 

Worn piston stem o-rings (10, 11).

Replace o-rings.

 

Bottom gasket (12) failed.

Replace gasket.

 

 

 

Fluid leakage from front of gun.

Fluid needle tip (5a) is dirty, worn,

Clean or replace fluid needle tip or

 

or damaged.

entire needle (5).

 

Dirty or worn nozzle (23).

Clean or replace nozzle.

 

 

 

Fluid is present at air cap holes.

Nozzle (23) is insufficiently tight-

Tighten or replace o-ring.

 

ened or sealing o-ring (36) is dam-

 

 

aged.

 

 

 

 

313516G

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Automatic AirPro Spray Guns Important Safety InstructionsModels ContentsFire and Explosion Hazard Pressurized Equipment Hazard General Metal Applications Selection ChartsWood Applications High Wear ApplicationsGun Selection Hvlp GunsProper Needle/Nozzle Selection Air CapsConventional Guns Atomizing Air Fan Air Air FlowMaximum HVLP/Compliant inlet manifold pressure Ventilate Spray Booth InstallationConfigure Gun and Manifold Circulating SystemGround System Install Air FittingsMount Gun Reciprocating Arm Rod MountStationary Support Retrofit Adapter Plate Mount Retrofit Adapter PlateSetup Connect Air LineConnect Fluid Hose Position Air Cap Flush Spray GunAdjust Spray Pattern Suggested Starting Settings AtomizationFan Air psi Air Pressure Regulator Operation Pressure Relief ProcedureApply Fluid IncorrectDaily Gun Care Clean and Flush Gun General System MaintenanceTroubleshooting General TroubleshootingProblem Cause Solution Spray Pattern Troubleshooting Disassembly ServicePart No A749 Gun Shown Fluid packings ReassemblyParts Gasket General Metal Applications Repair KitsWood Applications High Wear Applications114101 103 107 105108 Part No C342 Side Fluid Ports and Fan Adjustment Valve107 101 114 103 106 Accessories Inline Fluid Filter 24B707 Hvlp Pressure Verification KitSpray Tip Filters TipsDimensions Manifold Models 288217 or 288218, All Gun ModelsManifold Model 288221, All Gun Models Manifold Model 288160 or 288211, All Gun Models Manifold Model 288223 or 24C342, All Gun ModelsMounting Hole Layouts 23.4 mm 10.2 mm 53.3 mm 50 in .7 mm mounting hole 216 225 58.4 mm Retrofit Adapter Plate Technical Data Triggering SpeedSound Data Graco Information Graco Standard Warranty

ti13586a, ti13585a specifications

The Graco TI13586A and TI13585A are advanced airless paint sprayers designed for both professional contractors and serious DIY enthusiasts. These models stand out for their ability to deliver high-quality finishes quickly and efficiently, making them ideal for a wide range of painting tasks, from residential projects to large-scale commercial applications.

One of the main features of the Graco TI13586A and TI13585A is their powerful motor. These sprayers come equipped with a robust 0.75 HP pump that can generate high pressure, allowing for thorough and consistent coverage on various surfaces. This motor works efficiently to atomize the paint, producing a fine spray pattern essential for achieving a smooth finish without the need for excessive back-and-forth motion.

Another notable characteristic is the ease of use. The Graco TI13586A and TI13585A include an easy-to-operate control system that allows users to adjust the pressure settings, ensuring optimal spray control for various painting materials and techniques. This versatility is complemented by the FlexLiner container system, which reduces waste and allows for easy cleaning between jobs.

In terms of portability, these models are designed with mobility in mind. The lightweight construction, along with a durable cart that features large wheels, makes it easy to transport the sprayers to different job sites. Whether you're navigating stairs or uneven terrain, the design ensures that transportation remains hassle-free.

Both models are compatible with a variety of coatings, including latex paints, stains, and sealers, enhancing their adaptability for numerous applications. They also leverage Graco's proven Airless Technology, which ensures a consistent finish by using a piston pump system that allows for continuous operation without the risk of clogging. This technology results in faster project completion times, which is a significant advantage for contractors on a tight schedule.

Additionally, safety features such as a settings lock and the built-in pressure relief valve contribute to user protection while enhancing the overall painting experience. This focus on safety and efficiency ensures that both the TI13586A and TI13585A maintain Graco's reputation for quality and reliability in the airless spraying market.

In summary, both the Graco TI13586A and TI13585A represent powerful, user-friendly solutions for quality airless painting. Their effective motor, adjustable pressure settings, portability, and compatibility with various materials make them excellent choices for anyone looking to achieve professional-level results with ease and efficiency.
Top Page Image Contents