Graco ti13585a, ti13586a important safety instructions Setup, Connect Air Line, Connect Fluid Hose

Page 14

Setup

Setup

Connect Air Line

NOTE:

•You must install an air pressure regula- tor (F) on each gun air line to control air pressure to the gun. See FIG. 6.

•If your regulated air source does not have a filter, install an air filter (G) on each air line to ensure a dry, clean air supply to the gun. Dirt and moisture can ruin the appearance of your finished workpiece. See FIG. 6.

•Install a bleed type air shutoff valve (E) on each gun air supply line, down- stream of the gun air regulator, to shut off air to the gun.

1.For manifolds with a separate ATOM and FAN port, the gun cylinder, fan, and atomi- zation air must be supplied and regulated separately. For the manual fan valve mani- fold, only one supply line is required for both atomization and fan air.

NOTE: The gun atomizing and fan air inlets are 3/8 in. O.D. tubing. The cylinder air inlet accepts 1/4 in. (6.3 mm) O.D. tubing. Use 3/8 in. (9.5 mm) O.D. tubing for fan and atomiza- tion air to minimize excessive pressure drop in the hoses.

2.Connect each air hose (D) to a regulated air supply line (H).

H

G

F E D

ti01990

 

 

FIG. 6: Connect Air Line

Connect Fluid Hose

NOTE:

•Before connecting the fluid line, blow it out with air and flush it with solvent. Use solvent that is compatible with the fluid to be sprayed.

•Install a fluid regulator (L) on the fluid line to control fluid pressure to the gun.

•Install a fluid shutoff valve (M) to shut off the fluid supply to the gun.

•Filter the fluid line of coarse particles and sediment to avoid clogging the fluid nozzle and causing finishing defects. Inline fluid filter 24B707 is available. See Accessories, page 34.

1.Connect the fluid supply hose (J) to the gun fluid inlet (S), 1/4 npsm thread. See FIG. 8.

2.Connect the other end of the fluid hose (J) to a regulated fluid supply outlet (M).

3.In a circulating system, connect a grounded fluid return hose to the gun fluid outlet (T). See FIG. 8.

In a non-circulating system, remove the gun fluid outlet fitting (T) and plug the outlet port with the pipe plug supplied. See FIG. 8.

K

L

M

J

ti7016a

FIG. 7: Connect Fluid Hose.

14

313516G

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Important Safety Instructions Automatic AirPro Spray GunsContents ModelsFire and Explosion Hazard Pressurized Equipment Hazard Selection Charts General Metal ApplicationsGun Selection High Wear ApplicationsWood Applications Hvlp GunsConventional Guns Proper Needle/Nozzle SelectionAir Caps Air Flow Atomizing Air Fan AirMaximum HVLP/Compliant inlet manifold pressure Configure Gun and Manifold InstallationVentilate Spray Booth Circulating SystemInstall Air Fittings Ground SystemStationary Support Mount GunReciprocating Arm Rod Mount Retrofit Adapter Plate Retrofit Adapter Plate MountConnect Fluid Hose SetupConnect Air Line Flush Spray Gun Position Air CapFan Air psi Adjust Spray PatternSuggested Starting Settings Atomization Air Pressure Regulator Apply Fluid Pressure Relief ProcedureOperation IncorrectDaily Gun Care General System Maintenance Clean and Flush GunProblem Cause Solution TroubleshootingGeneral Troubleshooting Spray Pattern Troubleshooting Service DisassemblyPart No A749 Gun Shown Reassembly Fluid packingsParts Gasket Repair Kits General Metal ApplicationsHigh Wear Applications Wood Applications114101 103 107 105108 Side Fluid Ports and Fan Adjustment Valve Part No C342107 101 114 103 106 Accessories Spray Tip Filters Hvlp Pressure Verification KitInline Fluid Filter 24B707 TipsManifold Model 288221, All Gun Models DimensionsManifold Models 288217 or 288218, All Gun Models Manifold Model 288223 or 24C342, All Gun Models Manifold Model 288160 or 288211, All Gun ModelsMounting Hole Layouts 23.4 mm 10.2 mm 53.3 mm 50 in .7 mm mounting hole 216 225 58.4 mm Retrofit Adapter Plate Sound Data Technical DataTriggering Speed Graco Standard Warranty Graco Information

ti13586a, ti13585a specifications

The Graco TI13586A and TI13585A are advanced airless paint sprayers designed for both professional contractors and serious DIY enthusiasts. These models stand out for their ability to deliver high-quality finishes quickly and efficiently, making them ideal for a wide range of painting tasks, from residential projects to large-scale commercial applications.

One of the main features of the Graco TI13586A and TI13585A is their powerful motor. These sprayers come equipped with a robust 0.75 HP pump that can generate high pressure, allowing for thorough and consistent coverage on various surfaces. This motor works efficiently to atomize the paint, producing a fine spray pattern essential for achieving a smooth finish without the need for excessive back-and-forth motion.

Another notable characteristic is the ease of use. The Graco TI13586A and TI13585A include an easy-to-operate control system that allows users to adjust the pressure settings, ensuring optimal spray control for various painting materials and techniques. This versatility is complemented by the FlexLiner container system, which reduces waste and allows for easy cleaning between jobs.

In terms of portability, these models are designed with mobility in mind. The lightweight construction, along with a durable cart that features large wheels, makes it easy to transport the sprayers to different job sites. Whether you're navigating stairs or uneven terrain, the design ensures that transportation remains hassle-free.

Both models are compatible with a variety of coatings, including latex paints, stains, and sealers, enhancing their adaptability for numerous applications. They also leverage Graco's proven Airless Technology, which ensures a consistent finish by using a piston pump system that allows for continuous operation without the risk of clogging. This technology results in faster project completion times, which is a significant advantage for contractors on a tight schedule.

Additionally, safety features such as a settings lock and the built-in pressure relief valve contribute to user protection while enhancing the overall painting experience. This focus on safety and efficiency ensures that both the TI13586A and TI13585A maintain Graco's reputation for quality and reliability in the airless spraying market.

In summary, both the Graco TI13586A and TI13585A represent powerful, user-friendly solutions for quality airless painting. Their effective motor, adjustable pressure settings, portability, and compatibility with various materials make them excellent choices for anyone looking to achieve professional-level results with ease and efficiency.
Top Page Image Contents