Graco 249369, 288217, 249377 important safety instructions Automatic XT Spray Guns

Page 1

Instructions - Parts

Automatic XT Spray Guns

311051F

ENG

Airspray, HVLP, and Compliant guns for spraying paints and coatings.

See page 3 for model information.

100 psi (0.7 MPa, 7 bar) Maximum Working Fluid Pressure 100 psi (0.7 MPa, 7 bar) Maximum Working Air Pressure

Important Safety Instructions

Read all warnings and instructions in this manual.

Save these instructions.

TI8169b

Part No. 249377 Airspray Gun with fluid control shown mounted on Part No. 288223 Manifold.

TI8085b

Part No. 249369 Airspray Gun shown mounted on

Part No. 288217 Manifold.

II 2 G c T6

Image 1

Contents Automatic XT Spray Guns Related Manuals ContentsOrifice Size In. mm ModelsCompliant Airspray Equipment Misuse Hazard Toxic Fluid or Fumes Hazard Hvlp Spray Gun Assemblies Selection ChartsAirspray Gun Assemblies Compliant Spray Gun AssembliesGun Selection Proper Needle/Nozzle SelectionAir Caps Hvlp Gun Air Cap Pressure Air FlowVentilate Spray Booth InstallationConfigure Gun and Manifold Non-circulating SystemGround System Install Air FittingsReciprocating Arm Rod Mount Mount GunRetrofit Adapter Plate Stationary SupportConnect Air Line SetupConnect Fluid Hose Position Air Cap Flush Spray GunCompliant Hvlp and Compliant Gun Limits Adjust Spray PatternAir Pressure Regulator Operation Pressure Relief ProcedureApply Fluid IncorrectDaily Gun Care Clean and Flush Gun General System MaintenancePerform Pressure Relief Procedure, General Troubleshooting TroubleshootingProblem Cause Solution Troubleshooting Spray Pattern Troubleshooting Items Needed for Service ServiceReplace Fluid Packings and Air Seals Alternate Fluid Control Shown Reassembly Exploded View Part No Gun Shown PartsAir Caps PartsPart No. Description Qty Orifice Size LargeNeedle Tips Spray Gun Assemblies all modelsManifold with Bottom Fluid Ports Manifold with Side Fluid Ports Description QtySide Fluid Ports and Fan Adjustment Valve RING, Ptfe Accessories Dimensions Manifold Mounting Hole Layout Mounting Hole LayoutRetrofit Adapter Plate Gun with Retrofit Rear Port ManifoldTriggering Speed Technical DataGraco Information Graco Standard Warranty