Graco 247936 important safety instructions PRO Xs Waterborne Air Spray Gun, II 2 G EEx 0.24 mJ

Page 1

Instructions

Manual Electrostatic

PROXs Waterborne

Air Spray Gun

312900G

EN

For use with conductive spray materials (waterborne and other materials less than 1 megohm-cm). For professional use ONLY.

For use in Class I, Div. I hazardous locations using Group D spray materials.

#53

For use in Group II, Zone 1 areas using Group IIA spray materials.

II 2 G EEx 0.24 mJ

247936 Standard Model

Smart Model

247937 Smart Model

247937

 

100 psi (0.7 MPa, 7 bar) Maximum Air Inlet Pressure

100 psi (0.7 MPa, 7 bar) Maximum Working Fluid Pressure

Important Safety Instructions:

Read all warnings and instructions in this manual.

Save these instructions.

See page 2 for Table of Contents.

Standard Model 247936

Image 1
Contents II 2 G EEx 0.24 mJ PRO Xs Waterborne Air Spray GunTable of Contents FIRE, EXPLOSION, and Electric Shock Hazard Equipment Misuse Hazard How the Electrostatic Air Spray Gun Works OverviewSmart Model 247937 Standard Model 247936Air swivel inlet. Left-hand thread Fan air adjustment valve. Adjusts fan size ES indicator 247936 only. Green when ES is on Install the System InstallationVentilate the Spray Booth Typical Installation Key Connect the Charging Probe Connect the Air LineGrounded Air Supply Hose Connect the Fluid Line Connect the Exhaust TubeFilter the Fluid Orifice Size Select a Fluid Nozzle and Air CapFire, Explosion, and Electric Shock Hazard GroundingCheck Fluid Resistivity Check Electrical GroundingPrepare to Paint Check Fluid ViscosityTurn ES ON/OFF switch on Flush Shutdown Pressure ReliefPressurized Equipment Hazard Clean Gun Daily MaintenanceDaily System Care Electric Shock Hazard Electrical TroubleshootingSee Test Total Gun Resistance on See Check Electrical Grounding onTest Gun Resistance Electrical TestsTest Total Gun Resistance Test Charging Probe ResistanceTest Barrel Resistance Test Power Supply ResistanceSpray Pattern Troubleshooting Gun Operation Troubleshooting Prepare the Gun for Repair Gun RepairReplace Fluid Needle Replace Air Cap/NozzleRemove Fluid Packing Remove Fluid PackingPacking Rod Repair Packing RodRemove Barrel Install BarrelPower Supply Remove and Replace Power SupplyRemove and Replace Turbine Alternator Repair Fan Air Adjustment ValveRepair Air Valve Repair Fluid Adjustment ValveRepair ES ON/OFF Valve Remove and Replace Atomizing Air Restrictor ValvePart No 60 kV Electrostatic Gun, Series a Standard model PartsRef. No Multi-tool Part No 60 kV Electrostatic Gun, Series a Smart model Ref. No Packing Rod Ref. No Alternator Ref. No Fan Adjustment ValveRef. No ES ON/OFF Valve Smart Model controlsDescription Qty Description Qty Air Line Accessories AccessoriesFluid Line Accessories Miscellaneous Accessories Gun AccessoriesCategory Data Technical DataGraco Information Graco Warranty