Graco 247937, 247936 important safety instructions Maintenance, Clean Gun Daily

Page 20

Maintenance

Maintenance

Clean Gun Daily

1. Flush, page 18.

2.

a.Clean outside of gun with non-conductive, compatible solvent. Point gun down.

b.Use soft, damp cloth.

c.Do not immerse gun.

ti1295a

ti1292a

ti1293a

ti1294a

3. Remove air cap.

ti1296

4.Clean air cap, retaining ring, and nozzle with soft brush and non-conductive, compatible solvent.

ti1297a

5. Clean probe with soft brush and compatible solvent.

ti12716

6.Use toothpick or other soft tool to clean air cap holes. Do not use metal tools.

7. Reinstall air cap. Tighten securely.

ti1299a

20

312900G

Image 20

Contents PRO Xs Waterborne Air Spray Gun II 2 G EEx 0.24 mJTable of Contents FIRE, EXPLOSION, and Electric Shock Hazard Equipment Misuse Hazard Overview How the Electrostatic Air Spray Gun WorksSmart Model 247937 Standard Model 247936Air swivel inlet. Left-hand thread Fan air adjustment valve. Adjusts fan size ES indicator 247936 only. Green when ES is on Ventilate the Spray Booth InstallationInstall the System Typical Installation Key Grounded Air Supply Hose Connect the Air LineConnect the Charging Probe Filter the Fluid Connect the Exhaust TubeConnect the Fluid Line Select a Fluid Nozzle and Air Cap Orifice SizeGrounding Fire, Explosion, and Electric Shock HazardCheck Electrical Grounding Check Fluid ResistivityCheck Fluid Viscosity Prepare to PaintTurn ES ON/OFF switch on Flush Pressurized Equipment Hazard Pressure ReliefShutdown Maintenance Clean Gun DailyDaily System Care Electrical Troubleshooting Electric Shock HazardSee Test Total Gun Resistance on See Check Electrical Grounding onElectrical Tests Test Gun ResistanceTest Total Gun Resistance Test Charging Probe ResistanceTest Power Supply Resistance Test Barrel ResistanceSpray Pattern Troubleshooting Gun Operation Troubleshooting Gun Repair Prepare the Gun for RepairReplace Air Cap/Nozzle Replace Fluid NeedleRemove Fluid Packing Remove Fluid PackingRepair Packing Rod Packing RodInstall Barrel Remove BarrelRemove and Replace Power Supply Power SupplyRepair Fan Air Adjustment Valve Remove and Replace Turbine AlternatorRepair Fluid Adjustment Valve Repair Air ValveRemove and Replace Atomizing Air Restrictor Valve Repair ES ON/OFF ValveRef. No Multi-tool PartsPart No 60 kV Electrostatic Gun, Series a Standard model Part No 60 kV Electrostatic Gun, Series a Smart model Ref. No Alternator Ref. No Fan Adjustment Valve Ref. No Packing RodRef. No ES ON/OFF Valve Smart Model controlsDescription Qty Description Qty Fluid Line Accessories AccessoriesAir Line Accessories Gun Accessories Miscellaneous AccessoriesTechnical Data Category DataGraco Warranty Graco Information