Graco Inc 3A0243A, ti14916a important safety instructions Engine

Clutch Housing

Engine

Removal

NOTE: All service to the engine must be performed by an authorized Honda dealer.

1.Remove Pinion Assembly/Clutch Arma- ture/Clamp and Clutch Housing, as instructed on pages 17, and 18.

2.Disconnect all necessary wiring.

3.Remove two locknuts (17) and screws (16) from base of engine.

4.Lift engine carefully and place on work bench.

1

To the field

2

To the engine

3To gallon counter

3 4 To ground

1

Bottom View

3900

Green

16

ti5487a

17

Installation

1.Lift engine carefully and place on cart.

2.Install two screws (16) in base of engine and secure with lock nuts (17). Torque to 26 ft-lb (22.6 N·m).

3.Connect all necessary wiring.

4.Install Pinion Assembly/Clutch Armature/Clamp and Clutch Housing, as instructed on pages 17, and 18.

		ti5485b
			Bottom View
2	4	2	5900/7900

20 3A0243A