Displacement Pump
f.Place u-bolt on pump door protrusion
ti6375a
8. Ratchet pump door forward.
9. Open pump door.
ti14905a
10. Pull out pump pin and place in pin holder
ti14906a
Installation
1.Adjust piston rod with pin holder to pull out piston rod. Tap piston rod on hard surface to push in piston rod.
2.Push pump collar flush with bearing housing ledge to be able to close pump door.
ti6325a
ti5492a
3.Slide pump into connecting rod. Push pump pin until it is fully retained.
NOTE: Pin will snap into position.
ti6378a
ti14907a
4.Close pump door and rotate latch into position. Do not tighten latch.
ti6313a
ti14908a
24 | 3A0243A |