Setup
Installing Hopper (G)
1.Position coupler (H) over material outlet and slide hopper (G) straight down, over fitting as far as it will go. Make sure hopper bracket is positioned over cart handle rod.
ti3925a
2.Secure latches on each side by pushing them firmly up into locked position.
ti3902a
Additional Equipment Needed
Auxiliary Air Compressor (not supplied)
Minimum Requirements:
•12 CFM @ 100 psi (maximum 120 psi)
•3/8 in. x 25 ft. minimum airline rated at 120 psi
8 | 313384B |