Ryobi SSP0501 Extension Cords, Electrical Connection, Grounding Instructions, See

Page 6

ELECTRICAL

EXTENSION CORDS

Be sure to use an extension cord that has the capacity to handle the current the product will draw. An undersized cord will cause a drop in line voltage, resulting in overheating and loss of power. Use the chart to determine the minimum wire size required in an extension cord. Only round jacketed cords listed by Underwriter’s Laboratories (UL) should be used.

When working outdoors with a product, use an extension cord that is designed for outside use. This type of cord is designated with “W-A” or “W” on the cord’s jacket.

Before using any extension cord, inspect it for loose or exposed wires and cut or worn insulation.

A proper extension cord is available at an authorized service center.

If two extension cords are needed, knot them together to prevent them from becoming disconnected during use. Make the knot as shown in figure 1, then connect the plug end of once extension cord into the receptacle end of the other.

**Ampere rating (on product data plate)

0-2.0 2.1-3.4 3.5-5.0 5.1-7.0 7.1-12.0 12.1-16.0

Cord Length

 

Wire Size (A.W.G.)

 

 

 

 

 

 

 

 

 

25'

16

16

16

16

14

14

50'

16

16

16

14

14

12

 

 

 

 

 

 

 

100'

16

16

14

12

10

—

**Used on 12 gauge - 20 amp circuit. NOTE: AWG = American Wire Gauge

WARNING:

Keep the extension cord clear of the working area. Position the cord so that it will not get caught on lum- ber, tools, or other obstructions while you are working with a power tool. Failure to do so can result in serious personal injury.

ELECTRICAL CONNECTION

This product is powered by a precision-built electric motor. It should be connected to a power supply that is 120 V, AC only (normal household current), 60 Hz. Do not operate this product on direct current (DC). A substantial voltage drop will cause a loss of power and the motor will overheat. If the product does not operate when plugged into an outlet, double check the power supply.

GROUNDING INSTRUCTIONS

See Figure 1, page 12.

This product must be grounded. In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with an electric cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into a matching outlet that is properly installed and grounded in accordance with all local codes and ordinances.

Do not modify the plug provided. If it will not fit the outlet, have the proper outlet installed by a qualified electrician.

WARNING:

Improper installation of a grounded plug increase the risk of electric shock. When repair or replacement of the cord or plug is required, take the tool to an authorized service center.

Check with a qualified electrician or service personnel if the grounding instructions are not completely understood, or if in doubt as to whether the product is properly grounded.

Repair or replace a damaged or worn cord immediately.

This product is for use on a nominal 120 V circuit and has a grounding plug similar to the plug illustrated in figure 1. Only connect the product to an outlet having the same configuration as the plug. Do not use an adapter with this product.

WARNING:

Check extension cords before each use. If damaged replace immediately. Never use the product with a dam- aged cord since touching the damaged area could cause electrical shock resulting in serious injury.

6 — English

Page 5 Page 7
Image 6
Page 5 Page 7
Contents OPERATOR’S Manual Save this Manual for Future ReferenceWarranty IntroductionImportant Safety Instructions Read ALL InstructionsSpecific Safety Rules Symbols California PropositionName DESIGNATION/EXPLANATION Electrical Connection ElectricalExtension Cords Grounding InstructionsFeatures AssemblyFilling Sprayer with PAINT/STAIN OperationApplications Operating the SprayerCleaning the Sprayer After USE To clean the sprayer for short term storageCleaning the Sprayer for Storage MaintenanceGeneral Maintenance Replacing the Atomizer Valve AssemblyTroubleshooting Problem Cause Possible SolutionRefer to Operating the Sprayer earlier Table DES Matières GarantieArrière Instructions Importantes Concernant LA Sécurité AVERTISSEMENT Lire Toutes LES Instructions Règles DE Sécurité Particulières Savoir arrêter la machine rapidementSymboles Symbole Signal SignificationProposition 65 DE LA Californie AVERTISSEMENT  Connexion Électrique Caractéristiques ÉlectriquesCordons Prolongateurs Instructions DE Mise À LA TerreCaractéristiques AssemblageRemplir LE Pistolet DE Peinture OU DE Teinture UtilisationAvertissement AVERTISSEMENT  Utilisation DU PistoletNettoyage DU Pistolet Après Utilisation EntretienEntretien Général AvertissementNettoyage DU Pistolet AUX Fins D’ENTREPOSAGE Remplacement DE L’ENSEMBLE Valve DE PulvérisateurPour procéder au remplacement Voir les figures 8 9,Problème Cause Solution Possible DépannageFrançais Garantía Índice DE ContenidoIntroducción Pág. posteriorInstrucciones DE Seguridad Importantes AdvertenciaLEA Todas LAS Instrucciones Reglas DE Seguridad Específicas Precaución SímbolosPeligro California Propuesta DE LEY NÚMConexión Eléctrica Aspectos EléctricosCordones DE Extensión Instrucciones DE Conexión a TierraCaracterísticas ArmadoLlenado DEL Rociador CON PINTURA/ Tinte FuncionamientoUsos Funcionamiento DEL RociadorLimpieza DEL Rociador Después DE Utilizarlo MantenimientoPrecaución Mantenimiento GeneralVea las figuras 8 9, página Limpieza DEL Rociador Para GuardarloReemplazo DEL Conjunto DE Válvula Atomizadora Vea la figura 10, páginaCorrección DE Problemas Problema Causa Posible SoluciónGrounding pin broche de terre, patilla de conexión a tierra Place Line of Lubricant on Piston Shaft Page OPERATOR’S Manual / Power Paint Sprayer Tool

SSP0501 specifications

The Ryobi SSP0501 is a powerful and versatile multi-tool that caters to both DIY enthusiasts and professional tradespeople. This innovative tool excels in a variety of applications, making it a must-have in any workshop or home garage.

One of the standout features of the Ryobi SSP0501 is its robust motor, which delivers consistent power for efficient performance. The tool's design emphasizes ease of use, with ergonomic handles that offer a comfortable grip, reducing user fatigue during extended projects. The lightweight design further enhances maneuverability, allowing users to tackle intricate tasks without straining.

The SSP0501 is equipped with a range of attachments that enable it to function as a sander, grinder, and cutter. This versatility makes it suitable for a broad spectrum of materials including wood, metal, and plastics. The quick-release attachment system simplifies the process of switching between tools, ensuring that users can seamlessly adapt to various tasks without wasting valuable time.

Additionally, the Ryobi SSP0501 incorporates advanced technology to enhance its performance. The variable speed control allows users to adjust the tool's speed according to the specific requirements of the job at hand. This feature not only improves precision but also extends the lifespan of the attachments by minimizing wear and tear.

Safety is a paramount concern in all Ryobi products, and the SSP0501 is no exception. It includes built-in safety features such as an adjustable guard to shield users from debris and a lock-on switch for continuous operation, reducing the risk of accidental activation.

Battery performance is another crucial aspect of the SSP0501. It boasts a long-lasting battery life, and when paired with Ryobi's One+ system, users can interchange batteries across multiple tools, maximizing efficiency and convenience. The LED work light enhances visibility in dimly lit areas, providing added functionality during use.

In summary, the Ryobi SSP0501 stands out due to its durable construction, powerful motor, and a plethora of attachments that make it an exceptional choice for various projects. Its user-friendly design, adjustable speed control, and safety features further elevate its usability. Whether for household repairs or professional tasks, the SSP0501 is a formidable tool that combines power and versatility, ensuring it meets the demands of any user. This multi-tool is a valuable investment for those seeking practicality and efficiency in their work.
Top Page Image Contents