Ryobi P204 manuel dutilisation Features, Assembly

Page 6

FEATURES

PRODUCT SPECIFICATIONS

Chuck

1/2 in. Keyless

No Load Speed

0-440/0-1,600 r/min. (RPM)

Motor

18 V DC

Clutch

24 Positions

Switch

VSR (Variable Speed Reversible)

Torque

330 in.lb.

KNOW YOUR DRILL-DRIVER

See Figure 1, page 11.

The safe use of this product requires an understanding of the information on the product and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all oper- ating features and safety rules.

BIT STORAGE

Bits provided with the drill can be placed in the storage area, located on the base of the drill.

DIRECTION OF ROTATION SELECTOR

(FORWARD/REVERSE/center lock)

Your drill has a direction of rotation (forward/reverse/center lock) selector located above the switch trigger for changing the direction of bit rotation. Setting the switch trigger in the OFF (center lock) position helps reduce the possibility of accidental starting when not in use.

KEYLESS CHUCK

The keyless chuck allows you to hand-tighten or release the drill bit in the chuck jaws.

LEVEL

A level is located on the top of the motor housing to help keep the drill bit level during use.

MAG TRAY™ (SCREW HOLDER)

The magnetic tray conveniently stores screws or other small parts.

TORQUE ADJUSTMENT RING

Your drill has a 24-position clutch. The torque adjustment ring can be turned to select the right amount of torque for your application.

TWO-SPEED GEAR TRAIN (HI-LO)

The two-speed gear train is designed for drilling or driving at LO (1) or HI (2) speeds. A slide switch is located on top of your drill for selecting either LO (1) or HI (2) speed.

VARIABLE SPEED

The variable speed switch trigger delivers higher speed with increased trigger pressure and lower speed with decreased trigger pressure.

ASSEMBLY

UNPACKING

This product has been shipped completely assembled.

nCarefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included.

PACKING LIST

Drill

Double-ended Bit

Operator’s Manual

WARNING:

Do not use this product if it is not completely assembled or if any parts appear to be missing or damaged. Use of a product that is not properly and completely assembled could result in serious personal injury.

nInspect the product carefully to make sure no breakage or damage occurred during shipping.

nDo not discard the packing material until you have carefully inspected and satisfactorily operated the product.

nIf any parts are damaged or missing, please call 1-800-525-2579 for assistance.

WARNING:

If any parts are damaged or missing do not operate this product until the parts are replaced. Use of this product with damaged or missing parts could result in serious personal injury.

6 – English

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Accepts ALL 18 Volt one+ Battery Packs Save this Manual for Future ReferenceBatteries and chargers sold Separately Table of Contents IntroductionElectrical Safety General Safety RulesWork Area Safety Personal SafetySpecific Safety Rules Battery Tool USE and CareService Symbols Symbol Signal MeaningName DESIGNATION/EXPLANATION Features AssemblyOperation Installing Bits Adjustable torque clutchADJUSTing Torque TWO-SPEED Gear Train hi-loWood DRILLING Removing BitsDrilling Metal DRILLINGBattery Pack Removal and Preparation For Recycling MaintenanceGeneral Maintenance Chuck RemovalGarantie Règles DE Sécurité Générales AVERTISSEMENT Règles DE Sécurité Particulières Utilisation ET Entretien DE LA BatterieDépannage Symbole NOM Désignation / Explication SymbolesSymbole Signal Signification Aura pour conséquences des blessures graves ou mortellesCaractéristiques AssemblageCaractéristiques Relatives À LA Protection DES Piles Installation DU Bloc-piles Utilisation Retrait DU Bloc-pilesRéglage DU Couple Installation DES EmboutsEmbrayage DE Couple Réglable Rangement D’EMBOUTPerçage DU Bois Retrait DES EmboutsPerçage Perçage DU MétalEntretien Général EntretienRetrait ET Préparation DU Piles Pour LE Recyclage Retrait DU MandrinÍndice DE Contenido IntroducciónSeguridad Eléctrica Reglas DE Seguridad GeneralesAdvertencia Seguridad PersonalServicio Reglas DE Seguridad EspecíficasEmpleo Y Cuidado DE LA Herramienta DE BateríaS ¡ADVERTENCIAAdvertencia SímbolosPeligro PrecauciónCaracterísticas ArmadoCaracterísticas DE Protección DE LAS Baterías FuncionamientoAplicaciones Para Instalar EL Paquete DE BateríaSEmbrague de fuerza de torsión ajustable Gatillo DEL InterruptorGatillo DEL Interruptor DE Velocidad Variable Ajuste de la fuerza de torsiónTaladrado Instalación DE LAS BrocasRemoción DE LAS Brocas Taladrado EN MaderaDesmontaje DEL Portabrocas MantenimientoMantenimiento General Para Apretar EL Portabrocas Cuando SE AflojePage Right / Correct / Forma Correcta Wrong / InCorrect Forma incorrectaPage OPERATOR’S Manual / 18 vOLT DRILL-DRIVER ONE World TECHNOLOGIES, INC

P204 specifications

The Ryobi P204 is a versatile and reliable tool that is designed to meet the demands of both DIY enthusiasts and professional tradespeople. As part of Ryobi's ONE+ system, this compact drill/driver features a powerful and efficient motor that delivers exceptional performance in a variety of applications.

One of the main features of the Ryobi P204 is its 18-volt lithium-ion battery compatibility, which offers extended run time and consistent power. This battery technology enables users to take advantage of a wide range of Ryobi's ONE+ tools, allowing for a seamless transition between tasks without the need for multiple battery types.

The P204 is equipped with an efficient 2-speed gear system, allowing users to select between a high-speed setting for drilling into softer materials and a lower speed setting for driving screws or working with harder materials. This versatility makes it suitable for both heavy-duty construction projects and lighter home improvement tasks.

Another important characteristic of the Ryobi P204 is its adjustable clutch with 24 torque settings. This feature provides precise control over the amount of force applied when driving screws, reducing the risk of damaging materials and ensuring a secure fit.

Additionally, the drill/driver includes a keyless chuck that allows for quick and easy bit changes. This user-friendly design minimizes downtime and enhances productivity, making it an essential tool for both casual users and professionals.

The P204 also features an integrated LED light, which illuminates the work area and allows for increased visibility in dimly lit spaces, ensuring accuracy and precision in every project.

For added convenience, the tool is lightweight and ergonomically designed, reducing fatigue during extended use and making it easy to maneuver in tight spaces.

Overall, the Ryobi P204 combines power, versatility, and comfort in a compact design, making it a favored choice for many users. Its efficient battery system, adjustable torque options, and user-friendly features equip it to tackle a wide range of tasks with ease and precision, cementing its reputation as a dependable addition to any tool collection.
Top Page Image Contents