Fluke PN 643657 instruction sheet Temperature

Page 5

Temperature

16

MULTIMETER

°F

°C

OFF	V•Check
	A
CAT	TEMPERATURE

600V

COM+

80PK-1 Type K

Thermocouple

Probe

Note correct connector polarity.

Vent

or

Pipe

ip19f.eps

To meet stated accuracy, the 80AK temperature adapter must be at the same temperature as the meter. In addition, the 80AK and the 80PK-1 should be cleaned and lubricated regularly. Use any petroleum based lubricant.

Warning

To avoid possible electric shock, DO NOT apply thermocouple tip to any conductor that is greater than 30V AC, 42.4V pk, or 60V DC to earth.

Image 5

Contents Read First Safety Information Multimeter with TemperatureBattery Saver SymbolsAutomatic Range Selection Manual Range SelectionResistance and Continuity eR AC and DC Voltage∙Check Disable and re-enable VCheckTemperature If the capacitor requires more Capacitance EMicroamps μA Typical voltage Diode Test GRecords the lowest and highest measurements MIN MAX μFMIN MAX with Elapsed Time μF Continuity Capture Disabling the BeeperReplacement Parts MaintenanceFunction Range Resolution SpecificationsMIN MAX Recording Accuracy and Response Time MIN MAX Recording with Elapsed Time Limited Warranty & Limitation of Liability