Fluke PN 643657 instruction sheet Diode Test G, Typical voltage

Page 8

Diode Test G

Turn off circuit power before testing. For best results diodes

should be measured out of circuit. Also refer to V∙Check.

Good Diode

16 MULTIMETER	Typical voltage
	for silicon diode

Low Impedance

V•Check

OFF	V•Check
	A
CAT	TEMPERATURE

600V

COM+

16 MULTIMETER

OFF	V•Check
	A
CAT	TEMPERATURE

600V

COM+

Single beep

ip03i.eps

Forward Bias	Reverse Bias
Bad Diode
16 MULTIMETER	16 MULTIMETER

OFF	V•Check	OFF		V•Check
	A			A
CAT	A		CAT	TEMPERATURE
CAT	TEMPERATURE		600V	TEMPERATURE
600V			600V	+
COM	+	COM		+

or

ip04i.eps

Shorted

Open

Image 8

Contents Multimeter with Temperature Read First Safety InformationSymbols Battery SaverAutomatic Range Selection Manual Range SelectionAC and DC Voltage Resistance and Continuity eRDisable and re-enable VCheck ∙CheckTemperature Capacitance E If the capacitor requires moreMicroamps μA Diode Test G Typical voltageMIN MAX μF Records the lowest and highest measurementsMIN MAX with Elapsed Time μF Disabling the Beeper Continuity CaptureMaintenance Replacement PartsSpecifications Function Range ResolutionMIN MAX Recording Accuracy and Response Time MIN MAX Recording with Elapsed Time Limited Warranty & Limitation of Liability