Fluke PN 643657 instruction sheet Capacitance E, If the capacitor requires more

Page 6

Capacitance E

Turn off circuit power; then disconnect and discharge the capacitor before measuring capacitance.

16 MULTIMETER
		If the capacitor requires more
		discharging, diSC is displayed
		while the capacitor discharges.
OFF	V•Check
	A
CAT	TEMPERATURE
600V
COM	+	∝F 10 ∝F	100 ∝F 10,000 ∝F
	1	∝F 10 ∝F	100 ∝F 10,000 ∝F

+

ip05i.eps

Note correct probe polarity for polarized capacitors.

Image 6

Contents Multimeter with Temperature Read First Safety InformationAutomatic Range Selection SymbolsBattery Saver Manual Range SelectionAC and DC Voltage Resistance and Continuity eRDisable and re-enable VCheck ∙CheckTemperature Capacitance E If the capacitor requires moreMicroamps μA Diode Test G Typical voltageMIN MAX μF Records the lowest and highest measurementsMIN MAX with Elapsed Time μF Disabling the Beeper Continuity CaptureMaintenance Replacement PartsSpecifications Function Range ResolutionMIN MAX Recording Accuracy and Response Time MIN MAX Recording with Elapsed Time Limited Warranty & Limitation of Liability