Fluke PN 643657 instruction sheet MIN MAX μF, Records the lowest and highest measurements

Page 9

MIN MAX μF

(Records the lowest and highest measurements)

V∙Check, autoranging, and Battery Saver™ are disabled. Put the meter in the proper range before entering MIN MAX.

When the reading changes more than about 50 digits, the meter gives a short beep. When a new minimum or maximum is recorded, the meter gives a long beep.

Enter	Present Reading with	Maximum Reading
MIN MAX	Input Change Alert TM

2 sec

To Exit

Minimum Reading

ip10i.eps

Image 9

Contents Read First Safety Information Multimeter with TemperatureBattery Saver SymbolsAutomatic Range Selection Manual Range SelectionResistance and Continuity eR AC and DC Voltage∙Check Disable and re-enable VCheckTemperature If the capacitor requires more Capacitance EMicroamps μA Typical voltage Diode Test GRecords the lowest and highest measurements MIN MAX μFMIN MAX with Elapsed Time μF Continuity Capture Disabling the BeeperReplacement Parts MaintenanceFunction Range Resolution SpecificationsMIN MAX Recording Accuracy and Response Time MIN MAX Recording with Elapsed Time Limited Warranty & Limitation of Liability