Hobart Welding Products OM-944 196 639G, 175 manual Specifications, VAC Model

SECTION 3 − SPECIFICATIONS

3-1. Specifications

A. 115 VAC Model

Rated Welding	Amperage	Maximum Open-	Amperes Input at			Weight	Overall
			Rated Load Output
		Circuit Voltage		KVA	KW
Output	Range		115 V, 60 Hz, Single-			W/ Gun	Dimensions
		DC
			Phase
							Length: 18-7/8 in
90 A @ 19 Volts DC,			20	2.90	2.50	55 lb	(479 mm)
20% Duty Cycle							Width: 10-5/8 in
	30 − 135	28				(25 kg)
63 A @ 21 Volts DC,							(270 mm)
			15*	2.20*	1.77*
20% Duty Cycle*							Height: 12-3/8 in
							(314 mm)
	Solid/	Flux Cored/		Wire Feed Speed Range
	Stainless	Aluminum
Wire Type
	.024 − .030 in	.030 − .035 in
And Dia			370 − 840 IPM (9.2 − 21.8 m/min) At No Load
	(0.6 − 0.8 mm)	(0.8 − 0.9 mm)/
		.030	190 − 800 IPM (4.9 − 20.8 m/min) Feeding Wire
		(0.8 mm)
* CSA Rating

B. 230 VAC Model

Rated Welding	Amperage	Maximum Open-	Amperes Input at			Weight	Overall
			Rated Load Output
		Circuit Voltage		KVA	KW
Output	Range		230 V, 50/60 Hz,			W/ Gun	Dimensions
		DC
			Single-Phase
							Length: 18-7/8 in
130 A @ 20 Volts							(479 mm)
DC, 30% Duty Cycle						65 lb	Width: 10-5/8 in
At 60 Hz Input − 20%	30 − 175	30	19.5	4.60	3.75
						(29.5 kg)	(270 mm)
Duty Cycle At 50 Hz
Input							Height: 12-3/8 in
							(314 mm)
	Solid/	Flux Cored/		Wire Feed Speed Range
	Stainless	Aluminum
Wire Type
	.024 − .035 in	.030 − .045 in
And Dia
	(0.6 − 0.9 mm)	(0.8 − 1.2 mm)/	350 − 900 IPM (9.0 − 23.0 m/min) At No Load
		.030 − .035 in	150 − 850 IPM (3.9 − 22.1 m/min) Feeding Wire
		(0.8 − 0.9 mm)

Return To Table Of Contents OM-944 Page 9