Weber 5000 owner manual Assembly, Step, Check package contents

Page 7

Assembly

Tools needed

Screwdrivers, regular

and Phillips

Hammer

7/16, 5/8, 11/16 and 3/4 inch open-end or two adjustable wrenches

Pliers

Block of wood

Step 1

Check package contents

Cooking box (assembly)

Lid (assembly)

® ®

LP tank

Supplies needed

Your LP tank is shipped empty for safety. After setting the LP fuel scale you will need to fill it. (See Step "Fill LP tank").

You will need a soap and water solution to check for gas leaks. (See Step “Check for gas leaks”).

Note - The hardware size of nuts, bolts and screws is given. For example "1/4-20 x 2 inch bolt" means a bolt 1/4 inch in diameter with 20 threads to the inch, 2 inches long. On a small screw for example, "6-32 x 1/2 inch screw" means a number 6 screw, with 32 threads to the inch, 1/2 inch long.

While we give much attention to our products, unfortunately an occasional error may occur.

If a part is missing, do not go back to the store. Call the Weber Customer Service Center toll free

1-800-446-1071to receive immediate assistance. Have your owner’s manual and serial number of the barbecue available for reference.

LP tank filler adapter

Bottom tray

Front panel

Two accessory trays

Control panel

7

Image 7
Contents Genesis 5000 Series LP GAS Units only Warranty Patents and Trademarks Contents Operating area For Installation in CanadaGeneral Instructions StorageCheck package contents AssemblyStep Page Page Check contents of hardware packs Assemble frame Assemble wheelsComplete frame assembly Continue frame assemblyInstall left end panel Check the frame assemblyInsert casters Install side burner locks Install the three back panelsAdd cooking box Install manifold bracket Install side burnerInstall right end panel Install tank panel assemblyInstall igniter Install bottom accessory traysAdd fuel scale Check that all burner valves are off Install left hand swing tableInstall right hand swing table Hinge rod View from rear of barbecue Fill LP tank Set LP fuel scaleConnect LP tank Check for gas leaks Insert Flavorizer Bars Steam-N-Chips Smoker Install the bottom tray Install cooking gratesInstall the lid Secure side burner Install glass doorsComplete accessory installation To Extinguish LightingManual Lighting Lighting the side burner Side burner will only operate when the Front burner is litStorage and/or Nonuse Periodic CleaningCooking Storage and/or NonuseTo use the Steam-N-Chips Smoker Using the Steam-N-Chips SmokerRemoval of the LP tank Refilling the LP tankEngaged Liquid Propane LP Tanks Safe handling tips for LP GasInspection and Cleaning of the Weber Spider Stopper Guards Annual MaintenanceMain Burner Flame Pattern General MaintenanceMain Burner Cleaning Procedure Weber Spider Stopper GuardsView from behind cooking box Wing nuts Crossover Ignition System Operations FlameCheck Safety System Resembles paint peeling When burner is on HIGH. Flames do not runBurner does not light, or flame is low in High position Burner flame pattern is erratic. Flame is lowFlame is low in High position Side Burner TroubleshootingSide Burner Maintenance Problem Check Cure Side burner does not lightPage 19-20 22-24 Parts List Final Word Thanks
Related manuals
Manual 44 pages 20.87 Kb