Bostitch PC5000 Tool Operation Check, Trigger Operated Tool, Tool Must not Cycle, Tool Must Cycle

Page 8

TOOL OPERATION CHECK:

CAUTION: Remove all fasteners from tool before performing tool operation check.

1.TRIGGER OPERATED TOOL:

A.With finger off the trigger, hold the tool with a firm grip on the handle.

B.Place the nose of the tool against the work surface.

C.Pull the trigger to drive. Release the trigger and cycle is complete.

CAUTION: THE TOOL WILL CYCLE EACH TIME THE TRIGGER IS PULLED!

2.CONTACT TRIP OPERATION:

A.With finger off the trigger, press the contact trip against the work surface.

THE TOOL MUST NOT CYCLE.

B.Hold the tool off the work surface, and pull the trigger.

THE TOOL MUST NOT CYCLE.

C.With the tool off the work surface, pull the trigger. Press the contact trip against the work surface.

THE TOOL MUST CYCLE.

D.Without touching the trigger, press the contact trip against the work surface, then pull the trigger.

THE TOOL MUST CYCLE.

3.SEQUENTIAL TRIP OPERATION:

A.Press the contact trip against the work surface, without touching the trigger.

THE TOOL MUST NOT CYCLE.

B.Hold the tool off the work surface and pull the trigger.

THE TOOL MUST NOT CYCLE.

Release the trigger. The trigger must return to the trigger stop on the frame.

C.Pull the trigger and press the contact trip against the work surface.

THE TOOL MUST NOT CYCLE.

D.With finger off the trigger, press the contact trip against the work surface. Pull the trigger.

THE TOOL MUST CYCLE.

IN ADDITION TO THE OTHER WARNINGS CONTAINED IN THIS MANUAL OBSERVE THE FOLLOWING FOR SAFE OPERATION

•Use the BOSTITCH pneumatic tool only for the purpose for which it was designed.

•Never use this tool in a manner that could cause a fastener to be directed toward the user or others in the work area.

•Do not use the tool as a hammer.

•Always carry the tool by the handle. Never carry the tool by the air hose.

•Do not alter or modify this tool from the original design or function without approval from

BOSTITCH, INC.

•Always be aware that misuse and improper handling of this tool can cause injury to yourself and others.

•Never clamp or tape the trigger or contact trip in an actuated position.

•Never leave a tool unattended with the air hose attached.

•Do not operate this tool if it does not contain a legible WARNING LABEL.

•Do not continue to use a tool that leaks air or does not function properly. Notify your nearest Bostitch representative if your tool continues to experience

functional problems.

-8-

Page 7 Page 9
Image 8
Page 7 Page 9
Contents PC5000 Index Limited WarrantyIntroduction Safety Instructions AIR Supply and ConnectionsLoading Tool OperationPC5000 Tool Specifications OperationAIR Supply and Connections LubricationLoading the PC5000 To Prevent Accidental InjuriesTool Operation Trigger OperationContact Trip Operation Sequential Trip OperationTool Operation Check Trigger Operated ToolTool Must not Cycle Tool Must CycleReplacement Parts Assembly Procedure for SealsAIR SUPPLY-PRESSURE and Volume Basic Tool OperationTrouble Shooting Coil NailersAccessories Available Introducción ÍndiceNota Garantia LimitadaInstrucciones DE Seguridad Suministro DE Aire Y ConexionesAL Cargar LA Herramienta OperaciónOperación Especificaciones DE LA Herramienta PC5000Page Cómo Cargar EL PC5000 Operación DE Disparo Secuencial Operación DE LA HerramientaOperación DE Disparo POR Contacto Verificación DE LA Operación DE LA Herramienta Herramienta Operada POR GatilloOperación POR Disparo Secuencial LA Herramienta no Debe Efectuar SU CicloPresión Y Volumen DEL Suministro DE Aire Operación Básica DE LA HerramientaMantenimiento DE LA Herramienta Neumática Partes DE ReemplazoDiagnóstico DE Falla Clavadoras DE BobinaPage Garantie Limitée SommaireRemarque Consignes DE Sécurité Alimentation EN AIR Comprimé ET RaccordementChargement DE L’APPAREIL FonctionnementCaractéristiques DU PC5000 OpérationLubrification Chargement DU PC5000 Pour Prévenir UN AccidentMode D’EMPLOI Fonctionnement DE L’APPAREILAvant DE Manipuler OU D’UTILISER CET Outil Déclenchement À LA VoléeVérification DU Système DE Déclenchement Déclenchement PAR LA DétenteSystème DE Sécurité À LA Volée C.T Système DE Sécurité AU COUP-PAR-COUPDiagramme DE Fonctionnement DE Base D’UN Cloueur Alimentation D’AIR Pression VolumeEntretien DE L’APPAREIL Pièces DE RechangeProblème Cause Correction Problèmes DE FonctionnementAppareil À Rouleau Page Litho in U.S.A

103618REVE, PC5000 specifications

The Bostitch PC5000,103618REVE is a powerful and versatile pneumatic framing nailer designed for professionals and DIY enthusiasts alike. This tool is engineered to support a variety of construction applications, making it ideal for framing, roofing, and siding projects. With its robust construction and advanced features, the PC5000 delivers exceptional performance and efficiency.

One of the standout characteristics of the Bostitch PC5000 is its lightweight design, weighing in at just under 6 pounds. This makes it easy to maneuver, reducing user fatigue during extended use. The ergonomic grip further enhances comfort, allowing for improved control and precision when driving nails.

The PC5000 is equipped with a powerful motor that can drive nails ranging from 2 inches to 3-1/4 inches, making it capable of handling a wide variety of fastening applications. This nailer operates at a pressure range of 70 to 120 PSI, allowing users the flexibility to adjust according to the specific needs of their projects.

Another notable feature is the tool-free depth adjustment. This allows users to easily customize the driving depth of nails without the need for additional tools, ensuring optimal results for varying materials and applications. The Bostitch PC5000 also boasts a high-capacity magazine that holds up to 100 nails, reducing the need for frequent reloading and maintaining workflow efficiency on the job site.

The built-in nail lock-out mechanism is another safety feature that prevents dry firing, protecting both the tool and the material being worked on. Additionally, the selective trigger system allows for either sequential or contact firing modes, providing versatility based on the nature of the task at hand.

Furthermore, the Bostitch PC5000,103618REVE incorporates advanced technologies like an integrated air filter and a rubber grip, contributing to its durability and ease of use. The durable construction is designed to withstand harsh job site conditions, making it a reliable tool for contractors and builders.

In summary, the Bostitch PC5000,103618REVE combines portability, power, and user-friendly features, making it an excellent choice for professionals and DIYers looking for a high-performance framing nailer. Its efficient design, thoughtful technologies, and robust functionality set it apart in the competitive landscaping of pneumatic tools. Whether tackling large framing jobs or smaller projects, this nailer is sure to enhance productivity and deliver results.
Top Page Image Contents