Campbell Hausfeld CHN10600 specifications Tool USE and Care, Service

Page 3

CHN10600

Important Safety Instructions (Continued)

Avoid long extended periods of work

with the tool. Stop using the tool if you feel pain in hands or arms.

TOOL USE AND CARE

a.Use clamps or another practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against the body is unstable and is able to lead to loss of control.

b.Do not force the tool. Use the correct tool for the application. The correct tool will do the job better and safer at the rate for which the tool is designed.

c.Do not use the tool if the switch does not turn the tool on or off. Any tool that cannot be controlled with the switch is dangerous and must be repaired.

d.Disconnect the tool from the air source before making any adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool unintentionally.

e.Store the tool when it is idle out of reach of children and other untrained persons. A tool is dangerous in the hands of untrained users.

f.Maintain the tool with care. A properly maintained tool reduces the risk of problems and is easier to control.

g.Check for misalignment or binding of moving parts, breakage of parts, and any other condition that affects the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools. There is a risk of bursting if the tool is damaged.

h.Use only accessories that are identified by the manufacturer for the specific tool model. Use of an accessory not intended for use with the specific tool model, increases the risk of injury to persons.

i.Selecting an appropriate tool actuation system, taking into consideration the work application for which the tool is used.

Never use

gasoline or other flammable liquids to clean the tool. Never use

the tool in the presence of

flammable liquids or gases. Vapors could ignite by a spark and cause an explosion which will result in death or serious personal injury.

Do not remove, tamper with, or otherwise cause the trigger lock or trigger

to become inoperable. Do not operate any tool which has been modified in a like fashion. Death or serious personal injury could result.

Do not touch the trigger unless driving fasteners. Never attach air line to

tool or carry tool while touching the trigger. The tool could eject a fastener which will result in death or serious personal injury.

Always disconnect the tool from the power source when unattended, performing any maintenance or repair, clearing a jam, loading, unloading or moving the tool to a new location. Do not load the tool with fasteners when the trigger is depressed. The tool could eject a fastener causing death or serious personal injury.

Always fit tool with a fitting near the tool in such a manner that all compressed air in the tool is discharged at the time the fitting is disconnected. Do not use a check valve or any other fitting which allows air to remain in the tool. Death or serious personal injury could occur.

Never place hands or any other body parts in the fastener discharge area of

the tool. The tool might eject a fastener and could result in death or serious personal injury.

Never carry the tool by the air hose or pull the hose to move the tool or a compressor. Keep hoses away from heat, oil and

sharp edges. Replace any hose that is damaged, weak or worn. Personal injury or tool damage could occur.

Always assume the tool contains

fasteners. Respect the tool as a working implement; no horseplay. Always keep others at a safe distance from the work area in case of accidental discharge of fasteners. Do not point the tool toward yourself or anyone whether it contains fasteners or not. Accidental triggering of the tool could result in death or serious personal injury.

! WARNING

Do not operate or allow anyone else to operate the tool if any warnings

or warning labels are not legible. Warnings or warning labels are located on the tool magazine and body.

Do not drop or throw the tool.

Dropping or throwing the tool can result in damage that will make the tool unusable or unsafe. If the tool has been dropped or thrown, examine the tool closely for bent, cracked or broken parts and air leaks. STOP and repair before using or serious injury could occur.

Avoid using the tool when the

magazine is empty. Accelerated wear on the tool may occur.

Clean and check all air supply hoses

and fittings before connecting the tool to an air supply. Replace any damaged or worn hoses or fittings. Tool performance or durability may be reduced.

SERVICE

a.Tool service must be performed only by qualified repair personnel.

b.When servicing a tool, use only identical replacement parts. Use only authorized parts.

c.Use only the lubricants supplied with the tool or specified by the manufacturer.

www.chpower.com

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Description Table of ContentsSafety Guidelines Important Safety InstructionsWork Area Tool Components and SpecificationsPersonal Safety GeneralTool USE and Care ServiceRecommended Hookup Operating InstructionsFasteners User-Maintenance InstructionsTroubleshooting Chart CHN10600 What is not Covered Under this Warranty Limited WarrantyImportantes instructions de sécurité Table des matièresDéballage Directives de SécuritéImportantes instructions De sécurité SuitePièces détachées et fiche technique mécanisme de la loutil Importantes instructions de sécurité Suite Utilisation ET Entretien DE L’OUTIL11 Fr Source D’AIR Mode d’emploiBranchement Recommandé Branchement RecommandéAttaches Mode d’emploi SuiteGuide de Dépannage Nettoyer le chargeur14 Fr 15 Fr 16 Fr Garantie LimitéeMedidas de Seguridad ÍndiceDescripción DesempaqueInstrucciones de Seguridad Importantes ContinúaComponentes y Especificaciones de la Herramienta Instrucciones de Seguridad Importantes Continúa USO Y Cuidado DE LA Herramienta19 Sp Instrucciones de FuncionamientoConexión Recomendada Sujetadores Instrucciones de Funcionamiento ContinúaInstrucciones de Uso y Mantenimiento Almacenaje22 Sp Notas23 Sp Guía de Diagnóstico de AveríasHay una fuga de aire en el Debe reemplazar los anillos en O24 Sp Garantía Limitada

CHN10600 specifications

The Campbell Hausfeld CHN10600 is an innovative air compressor that combines efficiency and reliability for both home and professional use. Known for its versatility, this model stands out with a range of features that cater to various tasks, making it an essential tool for DIY enthusiasts and professionals alike.

One of the most notable features of the CHN10600 is its 3-gallon tank. This compact size strikes a perfect balance between portability and sufficient air storage, enabling users to operate tools for extended periods without frequent refilling. The 1.0 horsepower motor powers this compressor, delivering a maximum pressure of 100 PSI, which is ample for a variety of applications including inflating tires, powering pneumatic tools, and more.

The CHN10600 is equipped with an oil-free pump, which not only minimizes maintenance but also enhances usability. The oil-free design eliminates the need for regular oil changes, saving time and effort for users. This feature also contributes to the compressor's compact nature, making it lightweight and easy to transport, whether you are moving it from the garage to the workshop or taking it to a job site.

One of the standout technologies integrated into the CHN10600 is its low noise operation. This model is designed to operate quietly, making it ideal for residential areas or situations where noise reduction is a priority. The sound level is significantly lower than traditional compressors, allowing for a more comfortable working environment.

Furthermore, the Campbell Hausfeld CHN10600 boasts a user-friendly control panel that features easy-to-read gauges, making it simple for users to monitor pressure levels at a glance. The built-in regulator allows for precise adjustments, enabling users to tailor the output to the specific needs of their tools or projects.

Durability is a key characteristic of the CHN10600. It features a robust construction designed to withstand the rigors of frequent use, making it a reliable choice for both home and professional applications. With its combination of efficiency, low maintenance, and portability, the Campbell Hausfeld CHN10600 air compressor is a versatile and practical tool that meets the demands of various tasks while providing excellent performance. Whether you are inflating tires, brad nailing, or using airbrushes, this model delivers satisfying results with ease.
Top Page Image Contents