Grizzly G9953ZXF, G4815 instruction manual Minimum Cord Size, Grounding, Extension Cords

Minimum Cord Size

For 220V single-phase operation, use the follow- ing power cord:

G9953Z/G9953ZX—220V, Single-Phase
Cord	2 Pole, 3 Wire
Gauge	10

For 220V 3-phase operation, use the following power cord:

G9953ZXF—220V, 3-Phase
Cord	3 Pole, 4 Wire
Gauge	10
G4815—220V, 3-Phase
Cord	3 Pole, 4 Wire
Gauge	10

Grounding

Electrocution or a fire can result if the machine is not grounded correct- ly. Make sure all electri- cal circuits are ground- ed. DO NOT use the machine if it is not grounded.

In the event of an electrical short, grounding reduces the risk of electric shock by providing a path of least resistance to disperse electric cur- rent. This machine is equipped with a power cord that has an equipment-grounding prong. The out- let must be properly installed and grounded in accordance with all local codes and ordinances.

Extension Cords

We do not recommend the use of extension cords with 220V single or 3-phase equipment. Instead, arrange the placement of your equip- ment and the installed wiring to eliminate the need for extension cords.

No single list of electrical guidelines can be comprehensive for all shop environ- ments. Operating this machinery may require additional electrical upgrades spe- cific to your machine and shop environ- ment. It is your responsibility to make sure your electrical systems comply with all local electrical codes and ordinances.

Ultimate Series Jointers -9-