
Start Up
Serious personal injury could result if the machine is connected to the power source during assembly or adjustment. Wait until the machine is turned off, unplugged and all working parts have come to a complete stop before attempting to assemble or adjust the machine!
Loose hair and clothing could get caught in machinery and cause serious personal injury. Keep loose clothing rolled up and long hair tied up and away from machinery.
Projectiles from the machine could cause serious eye injury. Wear safety glasses at all times.
Before starting the machine:
1.Read this manual and make sure you follow all safety precautions before operating this machine.
2.Make sure the cutterhead guard is installed.
3.Make sure all tools and foreign objects have been removed from the machine.
4.Review and understand Section 3: Circuit Requirements beginning on page 6.
Starting the machine:
1.Wear safety glasses at all times while the jointer is running!
2.Plug the jointer into the power source.
3.Push the ON button shown in Figure 25.
Power Indicator | EMERGENCY STOP |
Button | |
Light |
|
| ON Button |
Figure 25. Pedestal switch.
Main STOP lever
Routine stops on the jointer should be performed using the STOP lever shown in Figure 26. Power is disconnected when the lever is activated, and with continued activation, the lever triggers a brake that slows the cutterhead to a stop.
STOP Lever
Figure 26. STOP lever.
Ultimate Series Jointers