Grizzly Set Up, Unpacking, Parts Inventory, Models G9953ZX, G9953ZXF, & G4815 Qty

SECTION 5: SET UP

Unpacking

NOTICE

The photos shown in this manual are of the Model G4815 unless otherwise noted.

The Model G9953 16" Ultimate Series Jointers and the Model G4815 20" Ultimate Series Jointer are shipped from the manufacturer in a carefully packaged crate. If there are any signs of crate damage after you have signed for delivery, imme- diately call our customer service for advice.

The Ultimate Series Jointers are heavy machines. DO NOT

over-exert yourself while unpacking or moving your machine

— you will need assis- tance and power equip- ment. Serious personal injury may occur if safe moving methods are not followed.

Sharp edges on metal parts may cause person- al injury. Examine the edges of all metal parts before handling.

Parts Inventory

Models G9953ZX, G9953ZXF, & G4815:	Qty
• Fence Assembly	1
• Air Pressure Gauge	1
• Air Pressure Regulator	1
• Push Blocks	2
• Air Wrench	1
• T-20 Torx® Screwdriver	5
• Extra Carbide Cutters - 14 x 14 x 2mm	10
• T-Handle For Torx® Bits	1
• Hardware Bag Contents:
—Regulator Mounting Bracket	1
—Air Quick Disconnect	1
—Phillips Head Bits	2
—T-20 Torx® Bits	15
—Cap Screws M6-1.0 x 14	30

Figure 10. Spiral Cutterhead Accessories.

Model G9953:	Qty
• Fence Assembly	1
• Push Blocks	2
• Allen Wrench Set	1
• Knife Setting Gauge	1
• Open End Wrench	1

Figure 11. Model G9953 accessories.

Ultimate Series Jointers -13-