Grizzly G9953ZXF, G4815 instruction manual Beginning Assembly, Fence

Beginning Assembly

This section will cover the basic assembly and adjustment instructions needed to begin opera- tion. Complete the assembly in the order provid- ed in this manual and then read the remaining portion of the manual before attempting any type of operation.

Your safety is important! Please follow the warnings below during this entire section:

Loose hair and clothing could get caught in machinery and cause serious personal injury. Keep loose clothing rolled up and long hair tied up and away from machinery.

Serious personal injury could occur if you con- nect your machine to the power source before you have completed the assembly process. DO

NOT connect the machine to the power source until instructed to do so.

Sharp edges on metal parts may cause person- al injury. Examine the edges of all metal parts before handling.

Fence

The fence assembly is a heavy part. Seek assis- tance when lifting it onto the fence base support.

NOTICE

The fence can easily scratch the table sur- face of the jointer. Use extreme care when making adjustments to the fence assembly

To install the fence assembly:

1.Carefully lift the fence assembly onto the fence base support. Note—Avoid letting the fence slide across the jointer tables as scratching will occur.

2.Attach the fence assembly to the jointer assembly with (6) M8-1.25 x 45 cap screws and (6) M8 lock washers (Figure 12).

Fence Assembly

Cap Screws and Lock Washers

(Also 3 On The Opposite Side)

Fence Base

Support

Figure 12. Fence assembly installed.

-16- Ultimate Series Jointers