Master Appliance UT-100, UT-200 instruction manual

Page 5

Ignition Instructions for use as a Soldering Iron or Heat Tool

1

 

2

 

 

 

1.Remove protective cap. Install soldering tip or heat tip as required by turning the knurled nut and tip housing to the right (figure1) and install tip (figure 2). Retighten knurled nut (Do not over tighten) Never change tips while hot.

2.Open the ignition vent by lowering the shutter lever. Do not touch the hot air exhaust opening. (Figure 4)

34

56

3.Position the gas control lever to 3 and move

on/off lever to “ON”. In cold conditions move gas lever higher, in warm conditions, lower.

4.Turn “ON/OFF” lever to “ON” position and ignite at ignition vent (Figure 3)

5.Wait until a glow is seen at the catalyst (seen through the ignition vent after about 4-5 seconds).

6.Close the ignition vent completely by raising the shutter lever (Figure 4). The flame will go out and the gas will react with the catalyst producing heat.

7.The heat of the soldering and heat tips can be controlled by the gas control lever (Figure 5).

8.Extinguish by turning the gas “ON/OFF” lever to “OFF” until it clicks (figure 6).

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Made in Japan UT-100 UT-200 Ultratorch Heat ToolsInformación de reglamentos Regulatory InformationAvis Réglementaires Description Hot Air Exhaust Opening Tip HousingHot Air Exhaust Knurled Nut Ignition VentFill with Ultratane Butane Principles of OperationUse as a Soldering Iron, Heat Tool or Torch Page UT-100 Ignition Instructions for use as a Butane Torch Before using as soldering or heat toolAlways use safety glasses or goggles Important Safety InstructionsUT-200 Ignition Instructions for use as a Butane Torch Do not misuse, abuse, alter or tamperSpecifications How to Empty Tank of Butane Gas if NeededOne gas filling At #3 setting Overall length with soldering tip 242mmHeat Tips Optional Accessories UT-100Soldering Tips Heat Shrink Attachment Optional Accessories UT-200Protective Cap Carrying StrapProblem Probable cause Solution Trouble ShootingSet flow control valve at setting To Replace EjectorOne Year Full Warranty Avertissements Remplir avec du butane Ultratane Principes de fonctionnementLe gaz butane continue à passer sur le catalyseur Évacuation Catalyseur d’air chaudPage Ou de chauffe par l’éjecteur pour chalumeau On off est sur « OFF » Consignes de sécurité importantesCaractéristiques Comment vider le réservoir de gaz butane, si nécessairePointes chauffantes Accessoires UT-100 en optionPannes de soudage Butane Ultratane Accessoires UT-200 en optionBouchon protecteur Rangement de votre outil de chauffe Ultratorch DépannagePour remplacer l’éjecteur Garantie d’un an Descripción AdvertenciasCargue con gas butano Ultratane Principios de operaciónUso como cautín, herramienta de calor o soplete Page El expulsor del soplete Siempre use lentes o gafas de seguridad Instrucciones importantes de seguridadEspecificaciones Cómo vaciar el tanque de gas butano si es necesarioLargo total con punta de cautín 242 mm 9.5 Duración de una carga de gasPuntas de calor Accesorios opcionales del UT-100Puntas de soldar Gas butano Ultratane Accesorios opcionales del UT-200Almacenamiento de su herramienta de calor Ultratorch Búsqueda y solución de problemasReemplazo del expulsor Racine, Wisconsin 53403 U.S.A. Teléfono 800-558-9413 Fax Garantía por un año completo

UT-200, UT-100 specifications

The Master Appliance UT-100 and UT-200 are high-performance heat guns designed for professionals and hobbyists alike. These tools are recognized for their versatility, durability, and advanced features, making them ideal for various applications, from soldering and shrink tubing to removing paint and thawing frozen pipes.

One of the key features of both the UT-100 and UT-200 is their adjustable temperature control. Users can easily regulate the heat output to suit specific tasks, ensuring optimal temperature for materials without the risk of damage. The UT-100 offers a temperature range of 200°F to 1000°F, while the UT-200 enhances this capability with a broader range of 200°F to 1200°F, allowing for more intricate and high-heat applications.

In terms of design, the heat guns are lightweight and ergonomic, making them comfortable to use for extended periods. They come equipped with a safety guard to prevent accidental contact with the hot nozzle. The integrated stand allows the tools to be set down safely while in use, providing added convenience and reducing user fatigue.

Both models utilize advanced heating element technology to deliver rapid heat-up times, ensuring that you spend less time waiting and more time working. The durable construction of Master Appliance tools ensures longevity and reliability, even in demanding work environments.

The UT-200 takes it a step further with a variable airflow feature, allowing users to emit air at different speeds without the need for additional attachments. This flexibility increases the adaptability of the tool for various tasks, such as delicate work on electronic components or heavy-duty applications needing high air movement.

Moreover, these heat guns are equipped with replaceable nozzles and accessories, enhancing their functionality. Users can choose from a variety of nozzle configurations, depending on the task at hand, such as concentrated beams for soldering or wide nozzles for heat shrinking.

Both models also prioritize user safety, featuring built-in thermal protection that prevents overheating, safeguarding both the tool and the user. The Master Appliance UT-100 and UT-200 represent a significant investment for those looking for high-quality, versatile heat guns that meet the demands of any project. Their blend of performance, durability, and user-friendly design makes them essential tools for professionals in various industries.
Top Page Image Contents