Master Appliance UT-200, UT-100 How to Empty Tank of Butane Gas if Needed, Specifications

Page 8

How to Empty Tank of Butane Gas if Needed

1.Only empty fuel tank in a well ventilated area and away from ignition sources. Remember butane is heavier than air.

2.Depress the filler valve at the back of the tank with a small bladed screwdriver and let the butane gas escape through the small orifice opening. It takes approximately one minute for the butane to escape from the tank.

Be careful that the butane does not hit against your fin- gers or hands. This could cause frostbite of the skin.

3.One method is to poke a small bladed screwdriver through a piece of paper and then care- fully depress the filler valve.

The escaping gas will hit the paper and not your hand.

4.Never turn gas lever to “ON” and allow gas to evacuate through the ejector/tip. Doing this will clog the ejector and lead to premature failure.

5.Never try to unscrew the filler valve as it is adhesively bonded to the tank. Breaking of this bond will destroy the unit, caus- ing the tank to leak.

Specifications

 

UT-100

UT-200

 

 

 

 

Overall length with soldering tip

242mm

(9.5 in.)

286mm (11.3 in.)

Overall length with heat tip

227mm

(6.9 in.)

268mm (10.5 in.)

Overall length as torch

198mm

(7.8 in.)

235mm (9.3 in.)

Weight (when gas filled)

105g (3.7 oz.)

220g (7.8 oz.)

Approximate temp. soldering tip

250° -

500°C

300° - 530°C

 

(392° - 932°F)

(572° - 986°F)

Approximate maximum temp. heat tip

700°C (1292°F)

700°C (1292°F)

Approximate maximum temp. torch

1300°C (2372°F)

1300°C (23722°F)

Gas Capacity Container

28ml (1.6 cu. in.)

63ml (3.8 cu. in.)

Approximate operating time

Max. 3 hours

Approx. 70 minutes

(one gas filling)

at #3 setting

at #3 setting

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents UT-100 UT-200 Ultratorch Heat Tools Made in JapanInformación de reglamentos Regulatory InformationAvis Réglementaires Hot Air Exhaust Opening Tip Housing DescriptionHot Air Exhaust Knurled Nut Ignition VentFill with Ultratane Butane Principles of OperationUse as a Soldering Iron, Heat Tool or Torch Page Before using as soldering or heat tool UT-100 Ignition Instructions for use as a Butane TorchImportant Safety Instructions Always use safety glasses or gogglesUT-200 Ignition Instructions for use as a Butane Torch Do not misuse, abuse, alter or tamperHow to Empty Tank of Butane Gas if Needed SpecificationsOne gas filling At #3 setting Overall length with soldering tip 242mmHeat Tips Optional Accessories UT-100Soldering Tips Optional Accessories UT-200 Heat Shrink AttachmentProtective Cap Carrying StrapTrouble Shooting Problem Probable cause SolutionSet flow control valve at setting To Replace EjectorOne Year Full Warranty Avertissements Principes de fonctionnement Remplir avec du butane UltrataneLe gaz butane continue à passer sur le catalyseur Évacuation Catalyseur d’air chaudPage Ou de chauffe par l’éjecteur pour chalumeau Consignes de sécurité importantes On off est sur « OFF »Comment vider le réservoir de gaz butane, si nécessaire CaractéristiquesPointes chauffantes Accessoires UT-100 en optionPannes de soudage Butane Ultratane Accessoires UT-200 en optionBouchon protecteur Rangement de votre outil de chauffe Ultratorch DépannagePour remplacer l’éjecteur Garantie d’un an Advertencias DescripciónCargue con gas butano Ultratane Principios de operaciónUso como cautín, herramienta de calor o soplete Page El expulsor del soplete Instrucciones importantes de seguridad Siempre use lentes o gafas de seguridadCómo vaciar el tanque de gas butano si es necesario EspecificacionesLargo total con punta de cautín 242 mm 9.5 Duración de una carga de gasPuntas de calor Accesorios opcionales del UT-100Puntas de soldar Accesorios opcionales del UT-200 Gas butano UltrataneAlmacenamiento de su herramienta de calor Ultratorch Búsqueda y solución de problemasReemplazo del expulsor Garantía por un año completo Racine, Wisconsin 53403 U.S.A. Teléfono 800-558-9413 Fax

UT-200, UT-100 specifications

The Master Appliance UT-100 and UT-200 are high-performance heat guns designed for professionals and hobbyists alike. These tools are recognized for their versatility, durability, and advanced features, making them ideal for various applications, from soldering and shrink tubing to removing paint and thawing frozen pipes.

One of the key features of both the UT-100 and UT-200 is their adjustable temperature control. Users can easily regulate the heat output to suit specific tasks, ensuring optimal temperature for materials without the risk of damage. The UT-100 offers a temperature range of 200°F to 1000°F, while the UT-200 enhances this capability with a broader range of 200°F to 1200°F, allowing for more intricate and high-heat applications.

In terms of design, the heat guns are lightweight and ergonomic, making them comfortable to use for extended periods. They come equipped with a safety guard to prevent accidental contact with the hot nozzle. The integrated stand allows the tools to be set down safely while in use, providing added convenience and reducing user fatigue.

Both models utilize advanced heating element technology to deliver rapid heat-up times, ensuring that you spend less time waiting and more time working. The durable construction of Master Appliance tools ensures longevity and reliability, even in demanding work environments.

The UT-200 takes it a step further with a variable airflow feature, allowing users to emit air at different speeds without the need for additional attachments. This flexibility increases the adaptability of the tool for various tasks, such as delicate work on electronic components or heavy-duty applications needing high air movement.

Moreover, these heat guns are equipped with replaceable nozzles and accessories, enhancing their functionality. Users can choose from a variety of nozzle configurations, depending on the task at hand, such as concentrated beams for soldering or wide nozzles for heat shrinking.

Both models also prioritize user safety, featuring built-in thermal protection that prevents overheating, safeguarding both the tool and the user. The Master Appliance UT-100 and UT-200 represent a significant investment for those looking for high-quality, versatile heat guns that meet the demands of any project. Their blend of performance, durability, and user-friendly design makes them essential tools for professionals in various industries.
Top Page Image Contents