Grizzly G0763 owner manual

3.Thread wheel flange onto sleeve then tighten it with wheel flange wrench until it is snug (see Figure 34)—overtightening may crack wheel.

Note: Flange has left-handed threads and threads onto sleeve counterclockwise.

Wheel

FlangeFlange

Wrench

Figure 34. Threading wheel flange onto wheel

sleeve.

4.Loosen the knurled knobs shown in Figure 35, then remove wheel guard front cover.

Wheel Guard

Front Cover

Knobs

Figure 35. Wheel guard components.

Model G0763 (Mfg. Since 8/13)

5.Using a slightly-oiled lint free cloth, wipe mat- ing surfaces of machine arbor and internal sleeve taper perfectly clean, then slide wheel assembly onto arbor.

6.Thread arbor nut onto arbor (see Figure 36) and tighten it until snug—overtightening may crack wheel.

Note: Arbor nut has left-handed threads and threads onto arbor counterclockwise.

Arbor

Nut

Figure 36. Wheel assembly and arbor nut

installed.

7.Re-install wheel guard front cover before reconnecting machine to power.

-29-