BM 2610021505
Assembly
CHIP ExTRACTION
The planer chip exhaust port may be used with a chip bag (Fig. 2) or a shop vacuum and vacuum connector (Fig. 3) to keep your work environment cleaner.
Bosch offers several different vacuum hoses that will connect directly to this tool. The optional VAC002 adapter will connect the hood to
UNCLOGGING THE CHIP ExHAUST SYSTEM Remove plug from power source if it becomes
necessary to manually remove chips. The blades are hidden from view and you may be cut if contacted.
To minimize the possibility of clogging, make sure:
1.The depth of cut is reasonable for the material.
2.The feed rate is reasonable for the material. (See FEED RATE & DEPTH OF CUT)
3.Unplug the planer and carefully insert a screwdriver or similar object into the dust port to break up the clog.
FIG. 2 | FIG. 3 |
| VACUUM |
EXHAUST | HOSE ADAPTER |
PORT | (OPTIONAL) |
PLANER BLADES
The planer blades are sharp ! WARNING and fragile and must be
handled carefully to avoid injury to the user or damage to the blades.
The PA1202 planer blades have two cutting edges, and may be reversed when one of the cutting edges becomes dull or chipped.
Do not attempt to sharpen or use resharpened used blades of any kind. Use only blades designated for use with this model, because other blades will cause vibration, decrease perfomance and may not clamp securely in blade holder.
REVERSING OR REPLACING BLADES
To reverse or replace the blade, loosen the clamping screws with blade wrench. With the screws loosened, slide the blade lengthwise out of the cutter drum, taking care to keep your fingers away from the sharp edges of the blade (Fig. 4).
A piece of wood may be used for this purpose. If the blade is gummed and difficult to remove, you may clean the blade with mineral spirits, lacquer thinner or alcohol.
Clean all surfaces before reinstalling the new blade, as this will ensure an accurate blade setting and proper tool performance.
FIG. 4 | 2.5 MM |
| BLADE |
| WRENCH |