Schneider Electric Class 615 Rear Connection, Connection to Bars, Plug-in Mounting Drawout

Connection to Bars

06153087

06153088

∅ D

d

e

L

Compact® NSF and NSJ 150 to 600 A Circuit Breakers

Section 8—Connections

Compact® NSF150 to NSJ600 circuit breakers are equipped as standard with captive nuts and screws for direct connection to bars:

•Compact NSF150/250 circuit breakers—M8 screws

•Compact NSJ400/600 circuit breakers—M10 screws

Compact® Circuit Breaker		NSF150/250	NSJ400/600
Pole Pitch	in. / mm	1.4 / 35	1.8 / 45
L	in. / mm	-1 / 25	-1.3 / 32
d	in. / mm	-0.4 / 10	-0.64 / 16
D	in. / mm	< 0.35 / 9	< 0.51 / 13
e	in. / mm	-0.23 / -6	0.11–0.39 / 3–10
∅	in. / mm	< 0.32 / 8	< 0.4 / 10

REAR CONNECTION

Fixed Mounting For connection of bars or cables with compression lugs. Rear connections are easily installed on the circuit breaker terminals. The same connection may be installed flat, edgewise or at a 45° angle. All combinations are possible. The circuit breaker is mounted on a backplate.

06153089 06153090 06153091

One Long + Two Short Four Positions

Plug-in Mounting

and Drawout

Mounting

For connection of bars or cables with compression lugs. Rear connections are installed flat. The plug-in base or the chassis are mounted through a front panel.

06153092 06153093

Plug-in Mounting Drawout Mounting

© 1995–2003 Schneider Electric All Rights Reserved 25