Schneider Electric Class 615 dimensions Motor Operator, Applications, Automatic, Manual Operation

Compact® NSF and NSJ 150 to 600 A Circuit Breakers

Section 9—Accessories

MOTOR OPERATOR

The motor operator remotely operates the circuit breaker featuring easy and sure operation:

06153103

•All circuit breaker indications and information remain visible and accessible, including trip units settings and circuit breaker connection

•Suitability for isolation is maintained and padlocking remains possible

•Double insulation front face

Applications	• Local motor-driven operation, centralized operation, automatic distribution control
	• Normal/standby source changeover or switching to a replacement source to optimize energy costs
	• Load shedding and reconnection to optimize energy costs
	• Synchrocoupling—less than five cycle closing time
Automatic	• On and off by two impulse type or continuous control signals
Operation	• Depending on the wiring, resetting can be done locally, remotely or automatically
	• Mandatory manual reset following tripping due to an electrical fault
Manual Operation	• Transfer to manual mode using switch with possibility of remote mode indication
	• On and off by two push buttons
	• Recharging of stored-energy system by pumping the lever nine times
	• Padlocking in off position
Installation and	• All installation (fixed, plug-in/drawout mounting) and connection capabilities are maintained
Connection	• Connection of the motor operator module behind its front cover to a built-in terminal block, for
	stranded copper wire #14 AWG (2.5 mm2)

© 1995–2003 Schneider Electric All Rights Reserved 31