Milwaukee 5303-20 manual Specific Safety Rules, Functional Description

SPECIFIC SAFETY RULES

1.Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator.

2.Wear ear protectors when using the tool for extended periods. Prolonged exposure to high intensity noise can cause hearing loss.

3.Keep hands away from all cutting edges and moving parts.

4.Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free replacement.

5.WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

•lead from lead-based paint

•crystalline silica from bricks and cement and other masonry products, and

•arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

Symbology Specifications

Double Insulated

Canadian Standards Association

Underwriters Laboratories, Inc.

Volts Alternating Current

No Load Revolutions per Minute

Amperes

					Capacities
				Drill Only	Rotary Hammer
		Tool		(steel or wood)	(concrete)
Cat.	Volts	No Load	No Load Blows	Twist	Carbide Tipped	Thin Wall
No.	AC	RPM	per Minute	Drill Bit	Percussion Bit	Percussion Bit
5303-20	120	0-880	4100	5/8" - 1-1/2"	3/16" - 1-1/8"	3-1/2"

	FUNCTIONAL DESCRIPTION
	3
1	2
	4

1.Side handle

2.	Clamping screw	7	6
3.	Depth guage
4.	Trigger		5

5.Selector lever

6.Quik-Change spindle

7.Quik-Change chuck

page 3