Chauvet 1-TRI IP user manual Mounting, Orientation Rigging

Page 12

Setup

Mounting

Orientation

Rigging

Procedure

Product Mounting Diagram

Before mounting this fixture, read and follow the safety recommendations indicated in the Safety Notes section (page 2 of this manual).

Always mount this fixture in any safe position while making sure that there is adequate room around it for ventilation, configuration, and maintenance.

Make sure to mount this fixture away from any flammable material as indicated in the Safety Notes section.

The COLORado™ 1-Tri IP consists of a sealed (IP66) housing with a double bracket mounting yoke. It has two DMX signal cables (DMX In/DMX Out), and two power cables (Power In/Power Out), all of them fitted with proprietary IP66 connectors.

CHAUVET® recommends following the general guidelines below when mounting the COLORado™ 1-Tri IP.

·When selecting an installation location, consider ease of access to the fixture for operation, programming adjustments, and routine maintenance.

·If hanging this fixture, make sure that the location where you are mounting the fixture can support its weight. Please see the Technical Specifications section of this manual for the weight requirement of this fixture.

The COLORado™ 1-Tri IP includes a safety cable and a mounting yoke to which you can attach one or two rigging clamps. You must supply your own “C” or “O” clamps and make sure that they are capable of supporting the weight of this fixture. Although it is possible to use a single clamp per fixture, CHAUVET® recommends using two clamps per fixture. Secure the fixture with the safety cable after mounting it to the truss.

C clamp

(not included).

Floor Mounting

Secure the safety cable using the passageway on the back of the fixture.

Overhead Mounting

-8-

COLORado™ 1-Tri IP User Manual Rev. 01c

Image 12
Contents Page Copyright 2010 CHAUVET. All rights reserved Author Editor Manager PD ManagerTable of Contents Table of Contents What is Included Before You BeginIcon Meaning Safety Notes Expected LED LifespanFeatures Additional Features OptionsIntroduction Product DescriptionDMX Channel Function RedGreen BlueProduct Overview Setup AC PowerAC Plug Power Linking Fuse Replacement Connection Wire US Wire Europe IP66 Pin Screw ColorDMX Linking ID AddressingDMX Modes Master/Slave Connectivity Mounting Orientation RiggingOperation Control Options ProgrammingDMX Personality DMX Control Without ID Addressing Button FunctionFrom previous Setting Description When R, G, and B are 255, the output will be at its maximumWhen R, G, and B are 255, CAL2 will determine the output Upload failed due to an errorReset Whites Setting White Calibration Go to SET RestTour Notes Menu Map DMX Values Tour ARC1 + DAR1 + S Channel Function Value Percent/Setting Hue ~100%General Maintenance Technical InformationTroubleshooting Guide Symptom Causes ActionsExploded View Photometrics Claims Contact Us World HeadquartersTechnical Specifications Chauvet