Operation
Reset
Whites Setting
White Calibration
Continued from previous page
This setting allows the user to reset the COLORado™
1)Go to SET> REST.
2)When prompted, enter the master access password as shown in Control Panel Lock.
3)Wait for the reset process to finish.
This setting allows the user to edit the temperature of the 11 white colors used in the Macros channel. The 11
1)Go to CAL1.
2)Select a white color (WT. 1~11).
3)Select a color (Red, Green, or Blue).
4)Select a color value (0~255).
5)Repeat for the other colors (Red, Green, or Blue).
6)Repeat for the other white colors (WT. 1~11).
This setting allows the user to select the white color shown by the COLORado™
1)Go to CAL2 > RGBW.
2)Select a color (Red, Green, or Blue).
3)Select a color value (0~255).
4)Repeat for the other colors (Red, Green, or Blue).
COLORado™ |